HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 31:

  When doing a firmware upgrade, what enables you to apply firmware updates with minimal research or interaction? (Select two.)

  A. Single Point of Connectivity Knowledge (SPOCK)
  B. BladeSystem Compatibility Chart
  C. Service Pack for ProLiants (SPP)
  D. SmartStart DVD
  E. HP firmware management tool
  B. BladeSystem Compatibility Chart
  C. Service Pack for ProLiants (SPP)

• Question 32:

  How does a c7000 enclosure retain air handling integrity when a fan is removed?

  A. The enclosure design uses blank panels to prevent air loss.
  B. A blanking panel causes the air flow to reverse, allowing warmer air to escape.
  C. The enclosure uses a self-closing door to prevent air loss.
  D. The fans increase in revolutions per minute to increase air volume.
  C. The enclosure uses a self-closing door to prevent air loss.

• Question 33:

  If you install two Onboard Administrator modules in a c7000 enclosure with different firmware revisions, which module will be active by default?

  A. the one on the left
  B. the one on the right
  C. the one with the lowest firmware regardless of position
  D. the one with the highest firmware regardless of position
  A. the one on the left

• Question 34:

  The customer has a single Onboard Administrator (OA), which needs to be replaced. What should you do before you replace the OA?

  A. Access the OA GUI or CLI and capture a system log.
  B. Telnet or SSH to the OA and collect a showall.txt.
  C. Browse to the OA and collect a script containing a list of the enclosure's current inventory.
  D. Use a USB key and the Insight Display to save the configuration.
  D. Use a USB key and the Insight Display to save the configuration.

• Question 35:

  Which step must be done after the system board is replaced on a BL460C G6?

  A. Re-enter the serial number.
  B. Clear NVRAM.
  C. Enable ASR.
  D. Reconfigure array.
  A. Re-enter the serial number.

• Question 36:

  What are some general requirements that must be met to update Virtual Connect firmware? (Select three.)

  A. If using Virtual Connect Enterprise Manager (VCEM), the VC domains must be placed in Maintenance Mode, or the firmware updates are blocked.
  B. Run only one instance of the Virtual Connect Support Utility (VCSU) to access a single enclosure on a single client at one time.
  C. Make sure the VC domains are not in Maintenance Mode, so the firmware updates have direct access.
  D. Run multiple instances of the VCSU, with multiple clients, to access an enclosure faster.
  E. Do not close the console application when a firmware update is in progress as it may corrupt the firmware.
  A. If using Virtual Connect Enterprise Manager (VCEM), the VC domains must be placed in Maintenance Mode, or the firmware updates are blocked.
  B. Run only one instance of the Virtual Connect Support Utility (VCSU) to access a single enclosure on a single client at one time.
  E. Do not close the console application when a firmware update is in progress as it may corrupt the firmware.

• Question 37:

  During HP SIM automatic discovery, many unmanageable systems and systems that do not need to be managed are discovered. What should you do to prevent this from happening?

  A. Power down all unwanted systems prior to the discovery phase so they will not be detected and added to the database.
  B. After all the systems are discovered, go back and delete the unwanted systems from the database.
  C. Remove the agents from the unwanted systems so HP SIM will reject them during discovery.
  D. Apply a filter to discard any systems that are not required, based on the type of system.
  D. Apply a filter to discard any systems that are not required, based on the type of system.

• Question 38:

  A BL490c G6 processor has been replaced. The customer wants the new processor to be tested for several hours before placing the server blade back in service. In order to accomplish this, what should you do after loading HP Insight Diagnostics Offline Edition?

  A. Choose an unattended quick test with a time limit.
  B. Choose a complete test with a time limit.
  C. Run an unattended quick test with a time limit.
  D. Run an unattended custom test with a time limit.
  D. Run an unattended custom test with a time limit.

• Question 39:

  A customer is experiencing intermittent storage connectivity issues in their BladeSystem environment. After collecting the log files from the external storage system and the interconnects, you suspect the problem is in the Onboard Administrator configuration.

  Which step should you take next in the troubleshooting process?

  A. Reset the Onboard Administrator to factory defaults.
  B. Develop an optimized action plan.
  C. Escalate the problem.
  D. Run the First Time Setup Wizard.
  B. Develop an optimized action plan.

• Question 40:

  Which HP Gen8 Blade Server function constantly records configuration, performance, and optional data?

  A. Active Health
  B. Integrated Management Log
  C. Health Agent
  D. Event Log
  A. Active Health