HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 21:

  Match the appropriate HP best practices rack location with each listed component to configure the rack shown.

  

  Hot Area:

  

  

• Question 22:

  Which HP blade comes with a license for Microsoft Cluster Server (MSCS)?

  A. BL490c
  B. BL870c
  C. X3800sb
  D. xw2x220c
  C. X3800sb

• Question 23:

  You replace a fully buffered DIMM and want to verify it by running the ROM-Based Memory Test. Where can you access this test?

  A. HP System Management Home Page
  B. Insight Diagnostics Offline Edition
  C. ROM-Based Setup Utility (RBSU)
  D. HP Insight Diagnostics Online Edition
  B. Insight Diagnostics Offline Edition

• Question 24:

  You are working with the c7000 enclosure at the customer site. You notice that Insight Display background is solid blue. What does this indicate?

  A. The power and cooling system is configured in a redundant mode.
  B. An administrator accessed the Onboard Administrator module.
  C. No error or alert condition exists.
  D. The enclosure UID is active
  D. The enclosure UID is active

• Question 25:

  How many half-height blades can you install in the enclosure shown?

  A. 2
  B. 4
  C. 6
  D. 8
  A. 2

• Question 26:

  What must be verified when replacing the Virtual Connect FlexFabric modules in a c7000 enclosure?

  A. Baseboard Management Controller firmware on all server blades
  B. Virtual Connect Manager SSO authentication with Onboard Administrator of the enclosure
  C. Onboard Administrator firmware and LOM firmware on server blades
  D. ILO firmware of the blade server located in bay 1 only
  C. Onboard Administrator firmware and LOM firmware on server blades

• Question 27:

  Click on the Ethernet pass-thru module in the graphic.

  Hot Area:

  

  

• Question 28:

  Which command allows you to break out to a Linux console session while booted to the HP Smart Update Firmware DVD to access debug trace logs to diagnose an update failure?

  A. Ctrl Alt Fn
  B. Ctrl Alt f b x
  C. Ctrl Alt d b x
  D. Ctrl Alt
  C. Ctrl Alt d b x

• Question 29:

  What happens when you turn the enclosure UID to "On" on the Insight Display of a c7000 enclosure?

  A. The rear enclosure UID LED illuminates and the color of the Insight Display changes to blue.
  B. The front enclosure UID LED illuminates and the color of the Insight Display changes to blue.
  C. The rear enclosure UID LED illuminates and the color of the Insight Display changes to green.
  D. The front enclosure UID LED illuminates and the color of the Insight Display changes to green.
  A. The rear enclosure UID LED illuminates and the color of the Insight Display changes to blue.

• Question 30:

  An engineer needs to install a UPS R8000/3 in an HP 10636 G2 rack. The rack already has one c7000 enclosure installed at the bottom of the rack. What is the best location for the UPS R8000/3 installation?

  A. Install the UPS R8000/3 in a dedicated rack.
  B. Mount the UPS R8000/3 at the bottom of the rack and install the c7000 just above the UPS.
  C. Install the UPS R8000/3 at the top of the rack for proper weight load balancing.
  D. Install the UPS R8000/3 just above the c7000 enclosure in the rack.
  B. Mount the UPS R8000/3 at the bottom of the rack and install the c7000 just above the UPS.