HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 101:

  What should you run in VCSU before imitating a Virtual Connect firmware upgrade?

  A. VC Support Dump
  B. Health Check
  C. Show all
  D. Show Config
  B. Health Check

• Question 102:

  Which interfaces can you use to access the Integrated Management Log (IML) on an HP server blade? (Select two)

  A. iLO web interface
  B. HP System Management Homepage
  C. Onboard Administrator Interface
  D. Insight Display
  E. Virtual Connect Interface
  B. HP System Management Homepage

• Question 103:

  Your customer lost the password information for the Onboard Administrator of a c7000 enclosure and asks you to restore administrator access.

  How should you do this?

  A. Connect to the serial port of the Onboard Administrator and press the reset button to restore the default password.
  B. Run Remote Insight Board Command Language (RIBCL) from the Insight Display.
  C. USE HP SUM in recovery mode.
  D. Use oneof the blades and run the Onboard Administrator recover option.
  A. Connect to the serial port of the Onboard Administrator and press the reset button to restore the default password.

• Question 104:

  What is the effect of a lost or misplaced Trusted Platform Module (TPM) key?

  A. The system requests the Administrator password.
  B. The system enters diagnostic mode.
  C. The system will not boot.
  D. Data loss may occur.
  D. Data loss may occur.

• Question 105:

  What does selecting the Allow Non-Bundled Versions provide in HP SUM?

  A. Other non-bundled products can be added to the bundle.
  B. All products will be updated including other manufacturers firmware and updates will be installed with the bundle.
  C. Old and new firmware files can be added and be installed with the bundle.
  D. All available firmware will be overwritten.
  A. Other non-bundled products can be added to the bundle.

• Question 106:

  A customer wants to verify that all the memory DIMMs in an HP Gen 8 server are genuine HP What will provide this information?

  A. Windows Event Viewer
  B. ROM based setup utility (RBSU)
  C. SmartMemory
  D. iLO Event Log
  C. SmartMemory

• Question 107:

  What can be used to restore an enclosure configuration using the Onboard Administrator Configuration Management screen? (Select two.)

  A. Telnet
  B. FTP
  C. Local
  D. Remote
  E. URL
  C. Local
  E. URL

• Question 108:

  What is required to recover from a failed Onboard Administrator (OA) firmware upgrade? (Select three.)

  A. OA firmware in a .bin file
  B. keyboard and monitor attached to the KVM port of OA
  C. a DHCP and FTP server accessible by OA
  D. a bootable USB key with the latest OA firmware
  E. local access to the enclosure
  B. keyboard and monitor attached to the KVM port of OA
  D. a bootable USB key with the latest OA firmware
  E. local access to the enclosure

• Question 109:

  Indicate what is included in an HP warranty.

  Select and Place:

  

  

• Question 110:

  What is a DDR3 Memory population rule to follow for Gen8 servers?

  A. If only one processor is installed in a two processor system, only half of the DIMM slots are available.
  B. DIMMs of different voltages cannot be mixed in the same bank.
  C. DIMMs of different speed grades can be mixed.
  D. UDIMMs, RDIMMs, or LRDIMMs can be mixed.
  A. If only one processor is installed in a two processor system, only half of the DIMM slots are available.