HP HP2-N29 Online Practice Questions and Exam Preparation

HP HP2-N29 Online Questions & Answers

• Question 11:

  While managing profiles from the Local Security Manager (LSM), what is applied to the Virtual Segment to implement security policy?

  A. Security Profile
  B. Block Log
  C. Security Blade
  D. Management Port
  A. Security Profile

  ---

  Reference: http://www.nfwest.com/tp/docs/techd293-tos3-1_ug.pdf (page 124)

• Question 12:

  When importing a profile from the IPS, what is added to the profile name? (Select two)

  A. SMS Name
  B. User Name
  C. Current Date
  D. Segment Name
  E. IPS Name
  C. Current Date
  E. IPS Name

• Question 13:

  Which pieces of information are needed to log in to the TippingPoint SMS?

  A. IP address, username, password
  B. TOS, DV, password
  C. Username, password, time of day
  D. model number, serial, password
  A. IP address, username, password

  ---

  Here is the SMS login screen:

  

  Reference: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02586168/c02586168.pd f (page 43)

• Question 14:

  The TippingPoint IPS Command Line Interface (CLI) is accessed using which protocol?

  A. SNTP
  B. VoIP
  C. TOS
  D. SSH
  D. SSH

  ---

  Command Line Interface (CLI) -- Command line interface for reviewing and modifying settings on the device. The CLI is accessible through Telnet, SSH (secure access), and the Console serial port. Reference: http://www.nfwest.com/tp/docs/techd291-tos3-1_commandref.pdf (page 5, see IPS local clients, 2nd bulleted point)

• Question 15:

  Each physical IPS segment is actually defined as how many virtual segments?

  A. one
  B. two
  C. three
  D. four
  A. one

• Question 16:

  Which product is part of HP TippingPoint's overall solution?

  A. Intrusion Prevention System
  B. Systems Management Solution
  C. Threat Diagnosis Center
  D. Intrusion Detection System
  D. Intrusion Detection System

• Question 17:

  What happens when you use the IPS factory-reset feature?

  A. Only reset policies to default.
  B. Remove all IPS configuration, logs, and accounts.
  C. Remove only security profiles
  D. Remove only network information
  B. Remove all IPS configuration, logs, and accounts.

• Question 18:

  Which value is required during the IPS OBE process?

  A. filter changes
  B. serial number
  C. TOS version number
  D. security level
  D. security level

  ---

  Before you begin, ensure that a console is connected to the TippingPoint IPS device via the console port, and that the console is powered on and ready. When you turn on the IPS, you will see several status messages before the OBE setup

  wizard initializes. When the OBE setup wizard runs, the following screen appears:

  Welcome to the TippingPoint Technologies Initial Setup wizard. Press any key to begin the Initial Setup Wizard or use LCD panel. Press any key to begin the OBE setup wizard. The following message appears:

  You will be presented with some questions along with default values in brackets[]. Please update any empty fields or modify them to match your requirements. You may press the ENTER key to keep the current default value. After each group

  of entries, you will have a chance to confirm your settings, so don't worry if you make a mistake. Continue to the following section for instructions on account security.

  Account Security Level

  The Security Level dialog sets the security level that restricts user names and passwords. The default security level is Level 2, but you have the option to select one of three available levels:

  There are three security levels for specifying user names and passwords:

  Level 0: User names and passwords are unrestricted. Level 1: Names must be at least 6 characters long; passwords at least 8. Level 2: In addition to level 1 restrictions, passwords must contain:

  -

  at least 2 alpha characters

  -

  at least 1 numeric character

  -

  at least 1 non-alphanumeric character Please specify a security level to be used for initial super-user name and password creation. As super-user, you can modify the security level later on via Command Line Interface (CLI) or Local Security Manager (LSM). Security level [2]: Reference: http://www.nfwest.com/tp/docs/techd291-tos3-1_commandref.pdf

• Question 19:

  Where are Traffic Management Filters configured?

  A. within the applicable Digital vaccine
  B. the Management Filter Toolkit, from the Shared Settings menu option
  C. within the applicable profile
  D. from the Shared Settings menu option
  C. within the applicable profile

  ---

  How To: Create/Edit a Traffic Management Filter

  1. On the Profiles - Traffic Management screen, do one of the following:

  -Click New.

  -Right-click on an entry and select New

  Reference: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02586208-1.pdf page 232.

• Question 20:

  Which type of serial connection is used for an SMS OBE?

  A. Wireless
  B. Token Ring
  C. Console Connection
  D. SNTP
  C. Console Connection