HP HP2-H08 Online Practice Questions and Exam Preparation

HP HP2-H08 Online Questions & Answers

• Question 81:

  Which HP utility should you use to check hard drive and memory health?

  A. HP Connection Manager
  B. hpsetcfg utility
  C. HP Performance Tuning Framework (PTF)
  D. HP BIOS diagnostics
  D. HP BIOS diagnostics

• Question 82:

  What minimum configuration is required in order to access the embedded SATA RAID configuration tools? (Select two.)

  A. The minimum required memory must be installed.
  B. RAID/AHCI SATA emulation must be enabled.
  C. System firmware must be updated.
  D. A second SATA hard drive must be added.
  E. RAID must be enabled in the BIOS.
  D. A second SATA hard drive must be added.
  E. RAID must be enabled in the BIOS.

• Question 83:

  Which key should you press during bootup to access the HP BIOS Setup Configuration Utility?

  A. F2
  B. F10
  C. F1
  D. F12
  B. F10

• Question 84:

  Which HP product supports a RAID 5 configuration?

  A. notebook
  B. desktop workstation
  C. slimline desktop
  D. mobile workstation
  B. desktop workstation

• Question 85:

  What is the first step you should take when a customer complains that the optical disk drive is not reading specific media?

  A. Update the BIOS.
  B. Reload the operating system.
  C. Check the media in another device.
  D. Update the firmware.
  C. Check the media in another device.

• Question 86:

  After installation of a new PC, the customer reports that it is running very slow over the network. What is the most likely cause?

  A. The IP address is incorrect.
  B. DHCP is disabled.
  C. The memory needs to be replaced.
  D. The Ethernet card has autonegotiated 10Mb speed.
  D. The Ethernet card has autonegotiated 10Mb speed.

• Question 87:

  What should you do first when a processor displays a temperature warning?

  A. Install a new processor fan.
  B. Replace the cache.
  C. Reseat the processor.
  D. Check the environment.
  D. Check the environment.

• Question 88:

  Which statement about SATA II is correct?

  A. SATA II supports native command queuing (NCQ).
  B. SATA II is more power-efficient than SATA I devices.
  C. SATA II cables can be folded safely.
  D. SATA II can daisy chain up to six drives.
  A. SATA II supports native command queuing (NCQ).

• Question 89:

  Which HP option contains an integrated hard drive?

  A. Mobile Expansion Unit (MEU)
  B. 3-in-1 NAS Port Replicator
  C. Simple Port Replicator
  D. Advanced Port Replicator
  B. 3-in-1 NAS Port Replicator

• Question 90:

  A monitor is moved to a new computer. Upon power-up the screen message Theft Mode Enabled displays. How can you restore the monitor to normal operation? (Select two.)

  A. Obtain the master PIN from the system administrator.
  B. Disable the Theft Mode in HP Display Utility.
  C. Enter the PIN in HP Display Assistant Utility.
  D. Return the monitor to original computer and disable Theft Mode.
  E. Press and hold the reset button on the back of the monitor.
  B. Disable the Theft Mode in HP Display Utility.
  D. Return the monitor to original computer and disable Theft Mode.