HP HP0-Y49 Online Practice Questions and Exam Preparation

HP HP0-Y49 Online Questions & Answers

• Question 41:

  What must a network administrator define on an HP Comware switch in order to implement username and passwords to protect access to the CLI?

  A. Authentication scheme
  B. Privilege levels
  C. Local authentication
  D. Super passwords
  C. Local authentication

  ---

  Authentication fallback

  If all authentication servers are unavailable, local authentication can be used. Local authentication can use the password control function to secure user passwords.

  Reference:

  https://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDispla y/resource.process/?spf_p.tpst=kbDocDisplay_ws_BIandspf_p.id_kbDocDisplay=docDisplayResURLandjavax.portlet.

  begCacheTok=com.vignette.cachetokenandspf_p.rst_kbDocDisplay=wsrp-resourceState %3DdocId%253Demr_na-c03536920-4%257CdocLocale%253Den_USandjavax.portlet.endCacheTok=com.vignette.cachetoken

• Question 42:

  A network administrator executes these commands on an HP Comware switch:

  [Comware] super password level 1 simple hp1 [Comware] super password level 2 simple hp2 [Comware] super password level 3 simple hp3 [Comware] quit

  The network administrator then executes this command to test the configuration:

  super 0

  What is the outcome of the configuration?

  A. The network administrator is immediately placed into Monitor view.
  B. Access is denied because no level 0 password has been defined.
  C. A password of hp0 must be entered to access the view.
  D. The network administrator is immediately placed into visitor view.
  D. The network administrator is immediately placed into visitor view.

• Question 43:

  Which ProVision configuration includes 10.0.3.0/24, which represents VLAN 30 in OSPF area 0?

  A. vlan 30 ip ospf area 0
  B. vlan 30 area 0
  C. interface vlan 30 ip ospf area 0
  D. router ospf area 0 vlan 30
  A. vlan 30 ip ospf area 0

• Question 44:

  On an HP Comware switch, which view must an administrator access in order to execute the debug command?

  A. Manager
  B. Operator
  C. System
  D. User
  D. User

• Question 45:

  Which credential is required to validate SNMP v2c write requests?

  A. MD5 authkey
  B. AAA authentication
  C. Scheme
  D. Community string
  D. Community string

• Question 46:

  A customer is implementing a network using HP ProVision switches.

  Which default setting applies to the ProVision switches?

  A. SSH is enabled
  B. All Ports are disabled
  C. Routing is enabled
  D. A static IP address is assigned to VLAN 1
  A. SSH is enabled

• Question 47:

  What is a valid reason to choose an 802.11a wireless implementation?

  A. It supports a large range (distance) from the AP at a given data speed
  B. It has fewer available channels than 802.11b/g, enabling easier deployment
  C. It has transmission speed higher than 802.11n
  D. It will not interface with an 802.11b/g installation.
  D. It will not interface with an 802.11b/g installation.

• Question 48:

  Which term refers to aggregated links on HP ProVision switches?

  A. Meshing
  B. NIC teaming
  C. EtherChannel
  D. Trunking
  D. Trunking

• Question 49:

  Which HP ProVision switch command defines 10.1.1.1 as a syslog server?

  A. Info-center 10.1.1.1
  B. Syslog 10.1.1.1
  C. Logging 10.1.1.1
  D. Logserver 10.1.1.1
  C. Logging 10.1.1.1

  ---

  The switch event log is stored in volatile memory and is lost on a reboot. It is best to configure a syslog server to handle the log on another server in non-volatile memory.

  For syslog:

  HP-Provision-Switch (config)# logging Reference: http://h10032.www1.hp.com/ctg/Manual/c02667379.pdf

• Question 50:

  What is an advantage of connecting servers directly to the HP FlexFabric?

  A. Multiple protocols are consolidated into one converged fabric.
  B. All end user host systems are directly connected to this same fabric.
  C. Physical connections can be easily moved within the fabric.
  D. FCoE SANs are isolated from the servers by the fabric.
  C. Physical connections can be easily moved within the fabric.