HP0-S32 Real Exam Questions and Verified Answers

Question 1 Single choice

What is considered a trunk in a Cisco switching environment?

A
aggregated switch links
B
tagged VLAN port (802.1Q)
C
tagged VLAN port plus link aggregation
D
Shared Uplink Set plus Connection Mode Auto

Show answer and explanation

Correct answer: B

Question 2 Multiple choice

How do you return a Flex-10 adapter to non-FlexNIC mode? (Select two.)

A
Delete the server profile.
B
Edit the FRU designator in the Onboard Administrator.
C
Replace the Flex-10 VC module with a standard VC module.
D
Choose a smaller MAC address range in the network settings.
E
Disable FlexNIC functionality in the ROM.

Show answer and explanation

Correct answers: A, C

Question 3 Single choice

What is the function of the active member of a dynamic LACP trunk?

A
determines the trunk link used for each given Layer 2 node-to-node conversation
B
requests dynamic port utilization from the receiving node to the sending node to form the LACP trunk
C
listens for BPDUs and forms a dynamic trunk when a MAC address of the same partner is heard on multiple ports
D
sends BPDUs and forms a dynamic trunk if a partner hears its MAC address on multiple ports

Show answer and explanation

Correct answer: D

Question 4 Single choice

How does a Layer 3 switch route a packet between directly connected VLANs?

A
It forwards the packet to its Layer 3 gateway, which submits the packet to its Layer 3 routing table and then forwards the packet to the proper VLAN.
B
It submits the packet to its Layer 3 routing table to determine the destination network interface. It then builds a new Layer 2 header tagged for the destination VLAN and forwards the packet to the destination.
C
It submits the packet to its Layer 3 routing table to determine the destination network interface. It then uses Layer 3 forwarding to get the packet to the destination.
D
It removes the Layer 2 VLAN tag, adds the new VLAN tag to the existing Layer 2 header, and uses Layer 2 forwarding to get the packet to the destination.

Show answer and explanation

Correct answer: B

Question 5 Single choice

Which action is required at the guest operating system level to enable it to run on a virtual machine?

A
A key code must be loaded into the registry and validated by VMware.
B
The VMware driver must be loaded for full network support.
C
No action is required because VMware is transparent to the operating system.
D
A VMware license must be loaded on each guest.

Show answer and explanation

Correct answer: C

Question 6 Multiple choice

What can be used by a QoS policy to classify traffic? (Select two.)

A
ingress port
B
packet size
C
Layer 2 802.1p (tag) field
D
egress port
E
TCP window size

Show answer and explanation

Correct answers: A, C

Question 7 Multiple choice

Which OSI model layers does a switch use? (Select two.)

A
Presentation
B
Data Link
C
Application
D
Network
E
Physical
F
Transport
G
Session

Show answer and explanation

Correct answers: B, E

Question 8 Multiple choice

What is the default mode of operation for Virtual Connect without a domain defined? (Select two.)

A
A single Virtual Connect network is connected to the external data center network over a single active uplink.
B
All server ports connected to the Virtual Connect Ethernet module are isolated from all external LAN and SAN connections.
C
All server ports are isolated from internal or external communications until a Virtual Connect domain has been created and configured.
D
An isolated separate network is created for each active server and segregated over a single shared uplink using VLAN tagging.
E
All server ports connected to the Virtual Connect Ethernet module are connected to a single Virtual Connect network.

Show answer and explanation

Correct answers: A, E

Question 9 Single choice

What must you define when configuring Virtual Connect Ethernet for a server blade that can support tagged Ethernet frames in VLANs 20, 30, 50, and 60?

A
a vNet in Map VLAN tags mode
B
a vNet in Tunnel VLAN tags mode
C
a Shared Uplink Set in Map VLAN tags mode
D
a Shared Uplink Set in Tunnel VLAN tags mode

Show answer and explanation

Correct answer: C

Question 10 Multiple choice

Which features make Flex-10 technology useful in a virtual machine environment? (Select two.)

A
interoperability with VMware vDS API
B
support for more VMs per host
C
more available NICs
D
optimized VM traffic for each function
E
reduced memory impact

Show answer and explanation

Correct answers: C, D