HP HP0-J67 Online Practice Questions and Exam Preparation

HP HP0-J67 Online Questions & Answers

• Question 1:

  A company with a first-generation deduplication appliance is migrating to an HP StoreOnce 6200 Backup System. After migration, what will be the size of the deduplication block?

  A. 4 kb
  B. 8 kb
  C. 16 kb
  D. 32 kb
  A. 4 kb

• Question 2:

  Refer to the exhibit.

  

  You run the EVAperf cs command and generate the output in the exhibit. What must you do to display the administrator-defined EVA names when using EVAperf?

  A. Upload the Command View naming table by using the CLI.
  B. Turn beaconing of the EVA on by using the EVAperf be command on the CLI.
  C. Import the friendly names from Command View by using CLI.
  D. Establish a relationship between Command View and EVAperf by using the System Options menu in the GUI.
  C. Import the friendly names from Command View by using CLI.

  ---

  http://www.fullyautomatednagios.org/wordpress/wp-content/uploads/2013/05/HP- StorageWorksCommand.pdf

• Question 3:

  While discussing a remote replication solution consisting of two HP 3PAR StoreServ arrays, the customer asks you about performance penalties when implementing synchronous replication to a second HP 3PAR StoreServ array. How should you respond?

  A. Synchronous replication affects write performance on the source array.
  B. Synchronous replication affects both read and write performance on the source array.
  C. Synchronous replication affects read performance on the source array.
  D. Synchronous remote replication does not affect performance on the source array.
  A. Synchronous replication affects write performance on the source array.

  ---

  

• Question 4:

  Refer to the exhibit:

  

  How does the cabling scheme ensure high availability for Virtual Library 2?

  A. The Virtual Tape Libraries are spread across both Fibre Channel ports and offer load balancing across the SAN.
  B. The medium changer and drives are connected redundantly to the Fibre Channel ports of the system and the SAN.
  C. The drives are presented through both Fibre Channel ports of the HP StoreOnce Backup System.
  D. The medium changer is connected redundantly, and the drives, by default, are connected 50% to each port.
  D. The medium changer is connected redundantly, and the drives, by default, are connected 50% to each port.

• Question 5:

  Refer to the scenario.

  A large publicly-traded motion picture exhibitor that is a leader in digital and 3D cinema deployments operates 233 theaters and more than 2,200 screens in small to mid-sized communities in 35 states around the United States. They rely on

  MS Exchange Server 2010 for email. MS SQL Server 2010 for analyzing data about movies and theater-goers, and MS Excel 2010 for crunching numbers.

  The company runs nightly incremental backups and a full weekly backup that consists of close to 7 TB of data which takes up 72 hours to complete. The quarterly backups add an additional 7 TB of data. Tapes are inventoried and transported

  from the main data center to the disaster recovery site 150 miles away. The process of transporting tape cartridges to and from the Disaster Recovery site requires hours of daily work.

  The company currently relies on an aging robotic tape library and a process that takes the nightly backup tapes offsite every morning. Additionally, the company keeps an inventory, and if a restore is necessary they have to retrieve the tapes

  from the DR site and transport them to the main data center site They have a 7 year data retention plan, and the tapes are expensive and not always reliable. Given the company's current system, if a full weekly backup fails over a weekend,

  the re-run could take up to 10 hours, even if just one job failed.

  The company has deployed a virtualized server infrastructure which runs VMware vSphere 5 on HP BladeSystem c7000 enclosures and BL460c servers interconnected with HP Virtual Connect Flex-10 10Gb Ethernet Modules as well as

  several HP ProLiant DL380 servers. The company's top four IT improvements goals are as follows:

  -replacing the aging robotic tape library

  - enabling replication of backed up data from the main data center to the disaster recovery site (150 miles)

  -retaining more backup data in smaller disk space

  - increasing efficiency reliability, and ease of system administration Moreover the company's top three business benefit goals are as follows:

  -increased confidence in disaster recovery

  -minimal disruption by backups during regular business hours

  -improved management of external audits

  The company has asked that you create multiple solution proposals and prioritize one when you return for a presentation.

  You have proposed an HP StoreOnce 4430 Backup System with HP Data Protector at both the primary and DR site. Which benefit of the proposed solution will allow you to meet to the stated IT objectives?

  A. built-on scale-out converged storage architecture eliminating any single points of failure
  B. eliminates the need for tape backup and offsite tape storage
  C. scalable up to 768 TB of storage and provides up to 100 TB/hr of throughput
  D. backup and recovery for multiple hypervisors and physical servers from a single console
  D. backup and recovery for multiple hypervisors and physical servers from a single console

• Question 6:

  You are asked to review the design of an HP 3PAR StoreServ implementation due to complaints from the customer regarding performance of virtual volumes on their production disk array. You make the following notes regarding the customer environment: Primary Data Center (DC) -> Secondary DC = 30 miles and 5ms roundtrip latency; Synchronous Replication Primary DC -> Disaster Recovery DC = 200 miles and 15ms roundtrip latency; Periodic Asynchronous Replication

  How should you resolve their performance problem?

  A. Convert all replication jobs to Synchronous Long Distance.
  B. Convert the replication job from the primary DC to the DR DC to Synchronous Long Distance.
  C. Convert the replication job from the primary DC to the; Secondary DC to Synchronous Long Distance.
  D. Convert all replication jobs to Periodic Asynchronous.
  D. Convert all replication jobs to Periodic Asynchronous.

• Question 7:

  Your customer has a number of existing HP P4000 G2 clusters across two sites. They are installing a new upgraded HP Storevirtual 4000 environment.

  The customer asks for the best method with the least amount of downtime to migrate the data from the physical servers to the new storage arrays.

  Which method do you suggest?

  A. HP REMOTE COPY
  B. VmWARE Vmotion
  C. Cluster Swap
  D. HP MPX200
  D. HP MPX200

• Question 8:

  Your customer has two data centers in a campus. The environment consists of: HP BladeSystem c7000 enclosures with HP Virtual Connect Flex-10 modules

  

  HP ProLiant BL460c Server Blades

  

  HP Storevirtual 4430

  

  HP 5900 Switches

  

  The HP Virtual Connect Flex-10 modules connect to the switches in three 10Gb Shared Uplink sets. The storage connects to the switches via 10Gb. The customer wants to migrate their network to a flat architecture and simplify managements.

  What should you implement to meet the customer requirements?

  A. HP Intelligent Resilient Framework (IRF)
  B. HP Virtual Connect Enterprise Manager (VCEM)
  C. Spanning Tree Protocol (STP)
  D. HP Intelligent Management Center (IMO)
  A. HP Intelligent Resilient Framework (IRF)

  ---

  http://allhpnetworking.blogspot.com/2010/10/hp-networking-series-example.html http://h17007.www1.hp.com/docs/mark/4AA3-4496ENW.pdf

• Question 9:

  Refer to the exhibit:

  

  A customer reports poor application performance on their Oracle database, which is on an existing two node provides you with the chart in the exhibit. Which assumption can you make based on this graph?

  A. Hard drive background tasks cause a bottleneck on the cluster.
  B. Asynchronous replication from this cluster causes a bottleneck.
  C. Database read operations cause a bottleneck on the cluster
  D. Writing archive logs causes a bottleneck on the cluster
  A. Hard drive background tasks cause a bottleneck on the cluster.

• Question 10:

  A NetBackup customer needs to improve the RTO after a disaster is declared at the primary data center. They have failed several disaster recovery audits because of extended recovery times You recommend that they replace tape library with an HP StoreOnce Backup System that replicates the primary data center backups to the remote site.

  Which device interface provides the lowest RTO?

  A. HP StoreOnce NAS
  B. HP StoreOnce Catalyst
  C. HP StoreOnce VTL iSCSI
  D. HP StoreOnce VTL FC
  D. HP StoreOnce VTL FC