HP HP0-J65 Online Practice Questions and Exam Preparation

HP HP0-J65 Online Questions & Answers

• Question 31:

  What is the best SAN topology for a many-to-many distributed data locality?

  A. meshed fabric
  B. fat tree backbone fabric
  C. ring fabric
  D. cascaded fabric
  B. fat tree backbone fabric

• Question 32:

  In Web Tools, which is a valid switch state?

  A. down
  B. segmented
  C. marginal
  D. reconfiguring
  C. marginal

• Question 33:

  Which activity should be done last during the fulfillment of an HP Installation and Startup Service?

  A. infrastructure functionality test
  B. customer orientation session
  C. documentation preparation
  D. Call Home Software (ISEE) installation
  B. customer orientation session

• Question 34:

  Which steps must be taken when migrating from a cascaded topology to a core-edge topology? (Select two)

  A. Calculate the number of ports needed for the additional ISLs
  B. Remove the cross-connected ISLs and leave the outer-connected ISLs
  C. Connect required servers, storage devices, and core switches
  D. Re-cable the ISLs to connect all edge switches to the core switches
  E. Connect high-performance servers to both a core switch and an edge switch
  C. Connect required servers, storage devices, and core switches
  D. Re-cable the ISLs to connect all edge switches to the core switches

• Question 35:

  Which tool helps a customer determine if the interoperability of their bill of materials (BOM) is supported by HP?

  A. HP Sizing and Configuration Tool
  B. HP Single Point of Connectivity Knowledge(SPOCK)
  C. HP SAN Designer
  D. HP Storage Product Selector
  B. HP Single Point of Connectivity Knowledge(SPOCK)

• Question 36:

  Which statements are true about the 8/20q Fibre Channel switch? (Select two.)

  A. It can only be used as an edge switch.
  B. It supports plug-and-play compatibility.
  C. It supports multi-switch networks with up to 6 switches and 3 hops.
  D. It supports only SFP8 transceivers.
  E. It has a base of 12 ports enabled, with 4-port increments.
  B. It supports plug-and-play compatibility.
  C. It supports multi-switch networks with up to 6 switches and 3 hops.

• Question 37:

  What is a function of HP SAN management software (such as HP Storage Essentials SRM) in a complex storage network environment?

  A. It converts all SAN management protocols into SNMP and WBEM
  B. Simplifies and integrates quality and features of HP SAN hardware devices
  C. It introduces SNMP overFibre Channel protocol to simplify alert and notifications
  D. It allows control of multiple SANs over FCIP Networks.
  B. Simplifies and integrates quality and features of HP SAN hardware devices

• Question 38:

  A small production company is planning to consolidate their legacy direct attach storage solutions. They plan to implement one small storage array and four servers with VMware vSphere. They are not likely to grow much in the next three years and have limited financial resources.

  Which SAN infrastructure solution should you recommend in your proposal?

  A. HP 8Gb Simple SAN Connection Kit
  B. HP 8/80 SAN Switch
  C. HP Nexus 500 Converged Network Switches
  D. HP SN8000B SAN Director
  A. HP 8Gb Simple SAN Connection Kit

• Question 39:

  A single-threaded application running on a single processor has slow performance. Data indicate the slow performance is due to an average disk queue-length of more than two. What can be done to increase performance?

  A. multi-thread the application
  B. use more disk drives in a stripe
  C. upgrade to faster I/O bus
  D. increase CPU speed
  E. upgrade to multi-processors
  B. use more disk drives in a stripe

• Question 40:

  Your customer wants to consolidate multiple SAN islands with B-Series and M-Series switches in a B- Series Meta SAN. What should you be knowledgeable about to successfully consolidate the SAN? (Select two.)

  A. Multi-protocol Router Blade (MP Router Blade)
  B. C-Series inter-VSAN routing (IVR)
  C. B-Series 400 Multi-protocol Router (400 MP Router)
  D. B-Series 200 Multi-protocol Router (200 MP Router)
  E. B-Series Virtual Fabrics with inter-fabric routing (IFR)
  A. Multi-protocol Router Blade (MP Router Blade)
  C. B-Series 400 Multi-protocol Router (400 MP Router)