HP HP0-J64 Online Practice Questions and Exam Preparation

HP HP0-J64 Online Questions & Answers

• Question 51:

  A customer storage infrastructure consists of eight HP StoreVirtual 4000 nodes in a cluster, connected to an HP 2910-24G al network environment. Server virtualization is done using VMware vSphere 5.1 on six hosts across two sites. Which drawbacks must the customer consider when upgrading the solution? (Select two.)

  A. When adding more nodes in the cluster, additional 1Gb network ports have to be added in each node.
  B. When using more than eight nodes in a cluster, a 10 Gb connection is recommended.
  C. When upgrading to VMware version 5.1, the iSCSI multipathing driver has to be configured.
  D. When using a server across the sites, VMware Site Recovery Manager is needed.
  E. When using 10 Gb the customer has to implement new network switches.
  B. When using more than eight nodes in a cluster, a 10 Gb connection is recommended.
  E. When using 10 Gb the customer has to implement new network switches.

  ---

  Recommended network switches for HP StoreVirtual 4000 Storage HP Networking has an extensive portfolio of Ethernet switches that are ideally suited for iSCSI deployments. These switches are designed to deliver high-performance, low-latency, and wire-speed Layer 2 to 4 network services. HP Networking top of rack series of switches offer unmatched combination of 1GbE and 10GbE ports density, high availability architecture, Intelligent Resilient Framework (IRF) technology as well as a full range of Layer 2 and or Layer 3 features depending on switch selection. These switches are built to support open and industry-standards networking protocol. These switches can be deployed within the network core or as a highperformance switch in the convergence layer or network edge of SMB and enterprise networks. Listed below is a selection of recommended top of rack models. These are the 3800, 5830, 5920, and 6600 series.

  Another recommended switching platform is the HP Networking 2920 series, to learn more visit hp.com/go/networking. http://h17007.www1.hp.com/docs/ products/4aa4-5213enw.pdf

  Networking 2910 http://www8.hp.com/pt/pt/products/networking-switches/product-detail.html?oid=3901673#! tab=specs

  Recommended switch infrastructure for an HP P4000 SAN HP does not recommend any particular switch for use with HP P4000 SANs. However, there is a set of minimum switch capabilities that make building a high-performance, high-availability storage network a relatively easy and cost effective task. The following are three commonly recommended HP switches, but ultimately you will need to follow the recommended switch capabilities in Table 1 below which provides guidance for general switch selection based on your specific needs. As a rule of thumb, any enterprise-class managed switch typically has the capabilities required for most customer installations.

  

  HP E2910 al Switch Series (10/100/1000Base-T and 4 x optional 10GbE)

  

  HP A5810-48G Switch (10/100/1000Base-T and 2 x 10GbE)

  

  HP E6600 Switch Series (10/100/1000Base-T and 10-GbE SFP+)

• Question 52:

  The IT manager of a company wants their NAS storage system that uses deduplication to be more efficient. Which NAS system meets this requirement?

  A. HP StoreOnce with catalyst
  B. HP 3PAR StoreServ with Thin Provisioning
  C. HP MSA 2040 with snapshot technology
  D. HP StoreEasy with Windows Storage Server
  D. HP StoreEasy with Windows Storage Server

  ---

  HP X3000 G2 Storage boosts the value of your array or SAN by adding Windows Storage Server-powered, IP-based gateway services to it.

• Question 53:

  A customer has an HP BladeSystem c7000 with HP Virtual Connect Flex-10 modules interconnect bays 1 and 2. The customer wants to install an HP Proliant BL460c Server Blade with no options. Which Feature is unavailable to the customer with this configuration?

  A. Fibre Channel
  B. Ethernet
  C. iSCSI
  D. VLANs
  A. Fibre Channel

  ---

  http://h18004.www1.hp.com/products/quickspecs/13127_div/13127_div.pdf http://h18000.www1.hp.com/ products/quickspecs/productbulletin.html#spectype=worldwideandty pe=htmlanddocid=13127

  Overview HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem

  Simplify and make your data center change-ready. The HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem is the simplest, most flexible connection to your networks. The Virtual Connect Flex-10 Ethernet Module is a new class of blade interconnect that simplifies server connections by cleanly separating the server enclosure from LAN, simplifies networks by reducing cables without adding switches to manage Virtual Connect wire-once connection management allows you to change servers in just minutes, not days, and tailors network connections and speeds based on application needs. HP Flex-10 technology significantly reduces infrastructure costs by increasing the number of NICs per connection without adding extra blade I/O modules, and reducing cabling uplinks to the data center network. The HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem is an innovative, new class of integrated interconnects from HP.

  

• Question 54:

  Which product supports the implementation of a new storage solution using Adaptive Optimization?

  A. HP StoreVirtual 4330
  B. HP StoreVirtual 4730
  C. HP StoreVirtual VSA
  D. HP StoreVirtual 4530
  A. HP StoreVirtual 4330

• Question 55:

  Which functionality has been added to HP Support Center?

  A. Automatic of Care Packs
  B. Preparation management of training packs
  C. HP Insight Online
  D. 24/7 proactive firmware updates
  A. Automatic of Care Packs

  ---

  Choose peace of mind with HP Care Pack Services

  Add to the quality, protection, and duration or speed of service currently available on your product. With HP Care Pack Services, you can have access to a team of HP experts whenever you need them, plus a range of support services tailored to meet your needs. Never be surprised by unexpected costs for protection, repair and support again. With HP, you are placing your trust in a brand that delivers globally and protects your technology investment, so you can focus on the things you care about.

• Question 56:

  HP 3PAR Remote Copy is supported in synchronous and asynchronous periodic modes. Which protocol is supported only by asynchronous periodic replication?

  A. FCIP
  B. iSCSI
  C. FCoE
  D. FC
  A. FCIP

  ---

  http://h20195.www2.hp.com/v2/GetPDF.aspx%2F4AA3-3053ENW.pdf Multi-protocol support With Native IP as well as Fibre Channel (FC) support, HP 3PAR Remote Copy Software delivers out-of-the-box connectivity over your IP network, enabling you to replicate data more cost-effectively by leveraging your existing infrastructure. Achieve robust DR without the expensive converters and management of a separate, special-purpose infrastructure.

  Connectivity choices HP 3PAR Remote Copy offers two native methods of connectivity in order to satisfy the varying business or technical needs of users: traditional Fibre Channel and TCP/IP over Gigabit Ethernet. With suitable switches, Fibre Channel over IP(FCIP) is also supported, allowing asynchronous periodic Remote Copy over longer distances without introducing GigabitEthernet into the SAN.

  http://webcache.googleusercontent.com/search? q=cache:TVcyLxsMW8AJ:h20195.www2.hp.com/V2/GetPDF.aspx%252F4AA3- 8318ENW.pdf +andcd=1andhl=pt-PTandct=clnkandgl=pt

• Question 57:

  How does the HP StoreVirtual DSM for Windows compare to the native MPIO provided by the operating system?

  A. It opens iSCSI connections to all StoreVirtual nodes
  B. It modified the iSCSI routing policies
  C. It creates iSCSI bond groups
  D. It changes iSCSI transfer block size
  A. It opens iSCSI connections to all StoreVirtual nodes

  ---

  The HP StoreVirtual DSM for Microsoft MPIO provides enhanced MPIO functionality as follows:

  Automatic creation of an I/O path to each storage system in the cluster on which the volume resides, plus a path for the administrative connection.

  http://h10032.www1.hp.com/ctg/Manual/c03687491.pdf

  

• Question 58:

  Which HP Storage solution aligns with the HP federated storage approach?

  A. HP StoreSure
  B. Hp StoreAll
  C. HP StoreEasy
  D. HP StoreVirtual
  D. HP StoreVirtual

  ---

  HP StoreAll http://www8.hp.com/pt/pt/products/data-storage/data-storage-products.html? compURI=1225919#.UpvSw9K8D6A

  HP StoreEasy http://www8.hp.com/pt/pt/products/data-storage/data-storage-products.html? compURI=1226325#.UpvS8dK8D6A HP StoreVirtual http://www8.hp.com/pt/pt/products/data-storage/data-storage-products.html? compURI=1279309#.UpvTINK8D6A

  http://www8.hp.com/pt/pt/products/data-storage/data-storage-products.html? compURI=1225885#.UpvTNNK8D6A

  HP StoreSure http://www8.hp.com/pt/pt/products/data-storage/data-storage-products.html? compURI=1401941#.UpvTtdK8D6A

  HP federated storage approach http://www8.hp.com/us/en/products/data-storage/data-storage-technology.html? compURI=1225859#.UpvUOdK8D6A

  

• Question 59:

  A Customer plans to centralize and virtualize their user desktop using VMware View Solution for 300 users.

  Their primary focus for this project is efficient backups. The customer design includes HP Ploliant BL460c Gen8 servers and an HP StoreVirtual solution. The customer needs an environment that uses a single management console for all

  backup and replication activities and the ability to implement federated deduplication.

  In you design, you want to add an HP StoreOnce B6200 Backup solution. Which HP StoreOnce emulation support the customer need?

  A. VTL
  B. StoreOnce Catalyst
  C. Enterprise Tape Library
  D. NAS Share
  B. StoreOnce Catalyst

  ---

  http://frankdenneman.nl/2009/10/11/lefthand-san-lessons-learned/

  Failover manager

  A failover manager is a special edition of a manager. Instead of running on a storage node, the failover manager runs as a virtual appliance. A failover manager only function is maintaining quorum. When designing a SAN spanning two sites,

  running a failover manager is recommended, The optimum placement of the failover manager is a third site. Place an even amount of managers in both sites and run the failover manager at an independent site.

  

  "single management console for all backup and replication and the ability to implement federated deduplication", requires StoreOnce Catalyst. http://bizsupport2.austin.hp.com/bc/docs/support/ SupportManual/c01727773/c01727773.pdf

• Question 60:

  Which techniques are used in an HP 3PAR StoreServ array for storage virtualization? (Select two)

  A. Logical disks
  B. vDisk
  C. Redundant Storage Sets (RSS)
  D. Network RAID
  E. chunklets
  D. Network RAID
  E. chunklets