Huawei HC-224 Online Practice Questions and Exam Preparation

Huawei HC-224 Online Questions & Answers

• Question 461:

  Two Eudemons in dual-system hot backup mode can be working in Active-Active mode or Active- Standby mode.

  A. True
  B. False
  A. True

• Question 462:

  Where is the MPLS label in a data frame?

  A. Behind the Layer 3 header and before the Layer 2 header
  B. Behind the Layer 2 header and before the Layer 3 header
  C. In the Layer 3 header
  D. Before the Layer 2 header
  B. Behind the Layer 2 header and before the Layer 3 header

• Question 463:

  Which of the following statements about the jitter and delay are true? (Select 3 Answers)

  A. The end-to-end delay is the sum of transmission delays, processing delays, and queuing delays along the packet forwarding path.
  B. The variation in packet delay is called jitter.
  C. The jitter depends on the delay. The lower the delay, the less the jitter.
  D. The jitter is independent of the delay.
  A. The end-to-end delay is the sum of transmission delays, processing delays, and queuing delays along the packet forwarding path.
  B. The variation in packet delay is called jitter.
  C. The jitter depends on the delay. The lower the delay, the less the jitter.

• Question 464:

  Which of the following statements about link aggregation are true? (Select 3 Answers)

  A. Link aggregation can be performed in manual load balancing or LACP mode. In manual loading balancing mode, LACP is enabled; in LACP mode, LACP is enabled too.
  B. In manual load balancing mode, all active member interfaces forward data and perform load balancing.
  C. In static LACP mode, the creation of the Eth-Trunk and the addition of member interfaces to the Eth-Trunk are performed manually. Compared with link aggregation in manual load balancing mode, active interfaces in static LACP mode are selected by sending LACP Data Units (LACPDUs).
  D. In dynamic LACP mode, the creation of the Eth-Trunk, the addition of member interfaces, and the selection of active interfaces are performed based on LACP negotiation.
  B. In manual load balancing mode, all active member interfaces forward data and perform load balancing.
  C. In static LACP mode, the creation of the Eth-Trunk and the addition of member interfaces to the Eth-Trunk are performed manually. Compared with link aggregation in manual load balancing mode, active interfaces in static LACP mode are selected by sending LACP Data Units (LACPDUs).
  D. In dynamic LACP mode, the creation of the Eth-Trunk, the addition of member interfaces, and the selection of active interfaces are performed based on LACP negotiation.

• Question 465:

  Which parameters are optional for configuring a BGP peer? (Select 2 Answers)

  A. IP address
  B. Description
  C. Password
  D. AS-number
  B. Description
  C. Password

• Question 466:

  Based on BGP route selection rules, how are Origin attributes listed in descending order of priority?

  A. EGP > IGP > Incomplete
  B. IGP > Incomplete > EGP
  C. Incomplete > EGP > IGP
  D. IGP > EGP > Incomplete
  D. IGP > EGP > Incomplete

• Question 467:

  Which of the following tools cannot be used for route filtering?

  A. Filter-policy
  B. IP-prefix
  C. Route-policy
  D. Policy-based-route
  D. Policy-based-route

• Question 468:

  What are the same fields in RSTP BPDUs and STP BPDUs? (Select 2 Answers)

  

  A. TCN
  B. TC
  C. TCA
  D. All of the above
  B. TC
  C. TCA

• Question 469:

  By default, what are the LOCAL_PREF and PREFERRED-VALUE in VRP system?

  A. 0,32768
  B. 100,0
  C. 255,100
  D. 32768,0
  B. 100,0

• Question 470:

  RSTP adopts fast convergence mechanism. So, there is no Forward Delay interval in RSTP.

  A. True
  B. False
  B. False