Huawei H35-211 Online Practice Questions and Exam Preparation

Huawei H35-211 Online Questions & Answers

• Question 31:

  (single) Which protocol is used to manage multicast group membership?

  A. IGMP
  B. PIM-SM
  C. PIM-DM
  D. MSDP
  A. IGMP

• Question 32:

  (multiple) Which of the following are commonly used positioning methods for Ethernet docking faults?

  A. View port indicator status
  B. Check the port configuration
  C. Ping
  D. Tracert
  A. View port indicator status
  B. Check the port configuration
  C. Ping
  D. Tracert

• Question 33:

  (multiple) The user is set to ONT dial-up, but the PC cannot access the Internet. Log in to the ONT web interface and find that the ONT has obtained the address. The PC can also obtain the private network address 192.168.100.2. What are the reasons?

  A. ONT NAT is not turned on
  B. LAN port is not set in Layer 3 mode
  C. WAN is not bound to LAN
  D. VLAN without WAN port
  A. ONT NAT is not turned on
  C. WAN is not bound to LAN

• Question 34:

  The complete SIP message interaction process will contain multiple request and response messages, and the sIP message header field can be used to describe what the specific solution corresponding to the current response message is

  A. Csea
  B. CaLL-ID
  C. First line
  D. Message body
  A. Csea

• Question 35:

  (multiple) VoIP users can hear normal dial tone after picking up the phone, but after dialing, the dial tone does not stop. What are the possible reasons?

  A. MGC did not issue signaling to stop dialing the dial tone.
  B. The A/ law setting of the DSP subboard is inconsistent with the user board.
  C. Adjacent user side slot small network is not removed
  D. MG did not correctly report the off-hook signal
  A. MGC did not issue signaling to stop dialing the dial tone.
  B. The A/ law setting of the DSP subboard is inconsistent with the user board.
  D. MG did not correctly report the off-hook signal

• Question 36:

  Max-Forwards fields can be used in S1P messages to solve loop problems and avoid endless packet forwarding.

  A. wrong
  B. Right
  B. Right

• Question 37:

  (multiple) Which of the following are general methods for XDSL fault location?

  A. Comparative swap analysis
  B. Configuration data analysis
  C. Statistical analysis of system resources
  D. Loopback test analysis
  A. Comparative swap analysis
  B. Configuration data analysis
  C. Statistical analysis of system resources
  D. Loopback test analysis

• Question 38:

  (single) Is the following description correct?

  The MA5600T/MA5680T supports VLAN tag conversion. When SVLANs with different attributes pass through and the service-port creates a service flow, if the tag-transform is set to default, the Tag conversion rules are different.

  A. True
  B. False
  A. True

• Question 39:

  Is the description under (single) correct?

  The mounting ears that the MA5616 dispenses with the device are used for 19-inch cabinet installation.

  A. True
  B. False
  A. True

• Question 40:

  (single) Is the following description correct?

  If the fast leave function of a multicast user is enabled, you can get a better service experience when users switch channels.

  A. True
  B. False
  A. True