Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 191:

  (single) Is the following description correct? The relationship between the transmission rate of ADSL and the transmission distance is: The farther the transmission distance is, the larger the attenuation is, the lower the transmission rate is, and the transmission distance is nonlinearly related to the attenuation.

  A. True
  B. False
  A. True

• Question 192:

  In a 2. 4 GHz frequency band, three sub-channels that do not interfere with each other can be used simultaneously.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 193:

  (single) Is the following description correct? Can the test engineer use the SmartKit NSE2700 Inspector to improve ADSL port activation efficiency?

  A. True
  B. False
  B. False

• Question 194:

  (multiple) UA2000 alarms are based on whether they are acknowledged and cleared. What are the alarm statuses?

  A. Unconfirmed not cleared
  B. confirmed not cleared
  C. Unconfirmed cleared
  D. Confirmed cleared
  A. Unconfirmed not cleared
  B. confirmed not cleared
  C. Unconfirmed cleared
  D. Confirmed cleared

• Question 195:

  Which of the following statements about MIB is incorrect?

  A. The MIB information of a device can be read using the MIB BROWSER tool.
  B. MIB is an important part of the SNMP network management model.
  C. The OID in a MIB is usually identified by a group of letters.
  D. MIB is short for management information library.
  C. The OID in a MIB is usually identified by a group of letters.

• Question 196:

  The OLT supports QinQ and VLAN stacking attributes. Which of the following VLANs supports QinQ?

  A. Sub VLAN
  B. Common VLAN
  C. Super VLAN
  D. Smart VLAN
  D. Smart VLAN

• Question 197:

  The SNMP protocol is at the ( ) layer in the TCP/IP protocol stack?

  A. Application layer
  B. Network layer
  C. Transport layer
  D. Control layer
  A. Application layer

• Question 198:

  (multiple) In the GPON network, which of the following reasons may cause the ONT to not be automatically discovered?

  A. The optical power received by the ONT is greater than the overload optical power.
  B. The optical power received by the ONT is less than the sensitivity value.
  C. The ONT auto-discovery function of the C.GPON port is not enabled.
  D. OLT uplink port down.
  A. The optical power received by the ONT is greater than the overload optical power.
  B. The optical power received by the ONT is less than the sensitivity value.
  C. The ONT auto-discovery function of the C.GPON port is not enabled.

• Question 199:

  (single) Is the following description correct? The MA5600T/MA5680T supports VLAN tag conversion. When an SVLAN with different attributes creates a service flow through the service-port, if the tag-transform is set to default, the Tag conversion rule is the same.

  A. True
  B. False
  B. False

• Question 200:

  (single) Is the following description correct? MA5600T/MA5680T GPBC/GPBD ONT loading board parallel, and supports 64 ONT parallel loading.

  A. True
  B. False
  A. True