Huawei H35-210 Online Practice Questions and Exam Preparation

Huawei H35-210 Online Questions & Answers

• Question 141:

  (single) Is the following description correct? The MA5600T/MA5680T GPBC/GPBD is loaded in parallel with the ONT loading board and supports 256 ONT parallel loads.

  A. True
  B. False
  B. False

• Question 142:

  In a traffic profile, the traffic rate can be configured, but the packet priority cannot be set.

  A. TRUE
  B. FALSE
  B. FALSE

• Question 143:

  (single) Is the following description correct? When the ONT is offline, the MA5600T/MA5680T can perform ONT PPPoE sim-ulation test operations.

  A. True
  B. False
  B. False

• Question 144:

  (multiple) PVM packet voice processing board, management and control of the narrowband user board in the UA5000 chassis, which are the main functions?

  A. Implement V5 protocol and H.248/MGCP protocol processing
  B. Support for uplinking TDM voice signals to the switch through the V5 interface
  C. Support for packaging TDM voice into IP packets and uplink to softswitch devices
  D. Support for packaging TDM voice into ATM cell uplink to softswitch device
  A. Implement V5 protocol and H.248/MGCP protocol processing
  B. Support for uplinking TDM voice signals to the switch through the V5 interface
  C. Support for packaging TDM voice into IP packets and uplink to softswitch devices

• Question 145:

  (single) Is the following description correct? The transmission form of the LAN is generally based on the bus type. The most commonly used corresponding protocol is the carrier sense and collision detection CSMA/CD protocol.

  A. True
  B. False
  A. True

• Question 146:

  (single) In the H.248 protocol, the terminal can be set to detect events by programming. Once these events are detected, the MG sends a message to the MGC for reporting or the MG takes corresponding action.

  A. Modify
  B. ServiceChange
  C. Notify
  D. AuditCapabilities
  C. Notify

• Question 147:

  Which of the following statements are incorrect ?

  A. WDM1r multiplexers can be deployed close to the CO or user as required.
  B. GPON and XGS-PON have different rates but the same network architecture. Therefore, to ensure that the device supports XGS-PON, you only need to change the optical modules on an ONU.
  C. The deployment of WDM1r multiplexers does not affect the calculation of optical link attenuation.
  D. Because the center wavelengths of XGS-PON and GPON are different and do not overlap or conflict with each other, they can share an optical distribution network (ODN).
  B. GPON and XGS-PON have different rates but the same network architecture. Therefore, to ensure that the device supports XGS-PON, you only need to change the optical modules on an ONU.
  C. The deployment of WDM1r multiplexers does not affect the calculation of optical link attenuation.

• Question 148:

  (single) What is the rated operating voltage of the MA5600 device?

  A. -24
  B. -36
  C. -48
  D. -72
  C. -48

• Question 149:

  (single) What is the allocation of terminal identifiers specified by the H248 protocol?

  A. Assigned by MG
  B. Assigned by the MGC
  C. When the terminal makes a call, the MG allocates and makes a call when there is an MGC assignment.
  D. When the calling party is assigned, the MGC is assigned when the called party is called.
  A. Assigned by MG

• Question 150:

  (single) MA5600T/MA5680T What is the command to query the GPON working mode?

  A. #display xpon mode
  B. (diagnose)%%display xpon mode
  C. #(config)display xpon mode
  D. All of the above
  B. (diagnose)%%display xpon mode