On the network shown in the figure, EBGP peer relationships are established between neighboring routers through directly connected interfaces.
The router ID of each router is 10.0.X.X, and the AS number is 6500X, where X is the number of the router.
Both R1 and R4 have static routes to 192.168.1.0/24, which are imported to BGP through the import-route command.

Which of the following statements are true?
A. The path for traffic from R6 to 192.168.1.0/24 is R6 R5 R4.As shown in the figure, the operator's BGP/MPLS IP VPN backbone network builds SP through DP. If you want to implement user X.
If the two sites communicate through the BGP/MPLS IPVPN network, PE1 and PE2 must use a 32-bit masked loopback interface address to establish an MP-IBGP peer relationship.
A. TrueOn the network shown in the figure, EBGP peer relationships are established between neighboring routers through directly connected interfaces. The router ID of each router is 10.0.X.X, and the AS number is 6500X, where X is the number of the router. Both Rl and R4 have static routes to 192.168.1.0/24, which are imported to BGP through the import- route command. R3 is configured with the peer y.y.y.y as-path-filter 1 import command for all peers. Which of the following sets of commands enables R3 to select the route with the longest AS_Path to 192.168.1.0/24?

On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. The import-route isis level-2 into level-1 command is configured on R2. In AS 65000, R1,
R3, R4, and R6 each establish iBGP peer relationships with R2 and R5. R2 and R5 are Route Reflectors (RRs), and R1, R4, R3, and R6 are clients.
The iBGP peer relationships are established using Loopback0. The IP address of Loopback0 on each router is 10.0.X.X/32, and the router ID is 10.0.X.X, where X is the number of the router.
R1 and R4 import the external route 192.168.1.0/24 to BGP through the import-route command, and R3 and R6 import the external route 192.168.2.0/24 to BGP through the import-route command.

Which of the following statements are true?
A. The route 192.168.2.0/24 in the routing table of R4 has two next hops.During an attempt to log in to a NetEngine AR6120 through the console port, the network engineer finds that the password is incorrect and the login fails. If a Telnet account can be used to log in to the device and the account has the permission to change the console port password, the network engineer can log in to the device through Telnet to change the console port password.
A. TRUEThe figure shows the output information on a switch.
Which of the following can be determined from the information?

What is the Router-ID of OSPFv3?
A. 100bit valueAs shown in the figure, all interfaces of the router enable DSPF. The cost value of the link is marked in the figure. R2 The LoopbackD interface is advertised in area 1, then the cost of R1 reaching 10.2/32 is?

According to this picture, cooked I'] can be judged?

Engineer Guan used two routers to test IPv6 services. By running the BGP4+ module to communicate with the branch, as shown in Juxin, an engineer captured packets to view the Updte packets sent by R1. Which of the following statements is true about the description of the message information?

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Huawei exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your H12-831 exam preparations and Huawei certification application, do not hesitate to visit our Vcedump.com to find your solutions here.