Assuming that the neighbor relationship between BGP routers has been established successfully, the configuration on R1 is shown in the figure. ask for R1 Which router can the route entry 10.10.10.0/24 be delivered to the farthest?

AS 200 bgp 100 peer 13.X3 as-number 300 peer B3.33 connect * interface LoopBackO peer 3.33.3 route-policy COMMUNITY eorx peer 3333 next >hop-local peer Xl.3.3 advertise-cofnmunity
network 10.10.T0.0 24 route^poktcy COMMUNITY permit node 10 prefix COMMUNITY spply cocYWTUiiMty route-policy COMMUNITY permit node 20 << ip prefix COMMUNITr index 10 permit
A. R1FILL IN THE BLANK
In the hub-spoke networking shown in the figure, to ensure correct route transmission, an administrator must manually configure the peer 10.1.2.1 _____ command in the IPv4 address family view of the BGP-VPN_out instance on the Hub-PE.

(Enter the answer in lowercase letters only.)
On the 05PFv3 network shown in the figure, each interface of R1 and R2 has two IPv6 addresses. Although the IPv6 address prefixes of R1 and R2 are different, they can still be used to establish an OSPFv3 neighbor relationship. If R2 is the DR, the Intra-Area-Prefix- LSA generated by R2 contains four prefixes.

Please pair the following DHCP attack types with corresponding explanations.
A. DHCPstarvation attack-3 DHCPPhishing attack man-in-the-middle attack-2 DHCPPacket flood attack-4Drag and Drop
Please match 0SPFv3LSA with its transmission range.
Select and Place:

From this picture, we can judge

On an enterprise network shown in the figure, EBGP is deployed between CEs and PEs. CE1 sends a VPN route to PE1.

Which of the following statements are false? Options:
A. To enable CE3 to receive the route, run the command peer 10.1.1.1 soo 200:1 on PE1.The figure shows information about an LSP (Link-State PDU) generated by an IS-IS router.
From the LSP, you can infer that the router is not the DIS (Designated Intermediate System) of the local link.

Options:
A. TRUEOn the network shown in the figure, IS-IS IPv6 runs on R2, R6, and R3, and the IPv6 address of Loopback0 on R6 is 2000::6/128. OSPFv3 runs on other links. Area 1 is a stub area, and Area 2 is an NSSA. IS-IS routes are imported to OSPFv3 on R2 and R3. Which of the following statements are true?

The configuration file of the device. Is the following statement D wrong?
A. Regardless of whether the device is configured with apricotBPDU Tunnel,neither will be correctMSTPmake an impactNowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Huawei exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your H12-831 exam preparations and Huawei certification application, do not hesitate to visit our Vcedump.com to find your solutions here.