Huawei H12-261 Online Practice Questions and Exam Preparation

Huawei H12-261 Online Questions & Answers

• Question 301:

  What is correct about the following description? Filter-policy

  A. In the middle, Filter-Policy, OSPF ASBR type 5 LSA type 7 LSA can be generated for filtering
  B. The previous list can be used for both route suffix filtering and packet filtering.
  C. Filter-Policy can receive or route the information line to filter the chain status, and modify the attributes of the route entry.
  D. Pre-use list When route filtering is applied, the entry ip ip-prefix 1 deny 0.0.0.0 0 less-equal 32 means that only the default route is matched.
  A. In the middle, Filter-Policy, OSPF ASBR type 5 LSA type 7 LSA can be generated for filtering

• Question 302:

  ISIS CSNP OSPF DD MA , , both the text and the report are reported in the network description of the road data summary role chain library for this report than the two classes below Correct method

  A. Both types need to be confirmed by the peer router after the message is sent. Otherwise, it needs to be retransmitted.
  B. OSPFA DD, DR/BDR; CSNP DIS in the textual interaction of the master-slave relationship report and the non-identity binding, and the text is only produced by the report.
  C. Once the connection establishes a successful neighbor, the CSNP DD message and the report will stop sending.
  D. After the two texts are sent, the router does not need to be authenticated.
  C. Once the connection establishes a successful neighbor, the CSNP DD message and the report will stop sending.

• Question 303:

  A (*,G) multicast entry is associated with which multicast type of feature within the HW IP multicast network?

  A. Shared tree
  B. Dense Mode
  C. Source tree
  D. Sparse Mode
  E. Dense Tree
  F. PIM bidirectional
  A. Shared tree
  D. Sparse Mode
  F. PIM bidirectional

• Question 304:

  IPSG static binding entries can be configured, or they can be generated when IPSG and DHCP Snooping are used together.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 305:

  Router HW1 runs BGP, and has IBGP peers and EBGP peers configured. Which of the following statements regarding the IBGP peers and EBGP peers are true?

  A. The router sends BGP updates learned from each IBGP peer to the other IBGP and EBGP peers.
  B. The IBGP peers must be directly connected. Otherwise, multi-hop IBGP must be configured on the router.
  C. The EBGP peers can establish peer relationships through loopback interfaces.
  D. The router sends BGP updates learned from each EBGP peer to the other EBGP and IBGP peers.
  E. The EBGP peers must be directly connected. Otherwise, multi-hop EBGP must be configured on the router.
  D. The router sends BGP updates learned from each EBGP peer to the other EBGP and IBGP peers.
  E. The EBGP peers must be directly connected. Otherwise, multi-hop EBGP must be configured on the router.

• Question 306:

  In the experimental network, the network is built according to the following topology. The SW1 SW2 STP is configured as the default and the function is disabled. The scene description is correct.

  

  A. Sw1 G0/0/2 Discarding entry status
  B. sw2 G0/0/1 Discarding entry status
  C. sw2 G0/0/2 Discarding entry status
  D. No interface is blocked
  E. SW1 G0/0/1 Discarding entry status
  D. No interface is blocked

• Question 307:

  When there are multiple matching VRP ACL rule rules, which of the following is true about matching order?

  A. Under the circumstances, follow, from small to large, match Rule-ID
  B. By default, the original line matching according to the depth first " "
  C. In case of case, the permit deny is matched first, and the order of matching is matched.
  D. There is only one match order and cannot be modified.
  A. Under the circumstances, follow, from small to large, match Rule-ID

• Question 308:

  Spanning Tree Protocol calculates path cost based on which of the following?

  A. Interface bandwidth
  B. Interface delay
  C. Hop count
  D. Interface bandwidth and delay
  E. Bridge priority
  A. Interface bandwidth

• Question 309:

  What is the function of Route Target (RT) on an MPLS VPN?

  A. Allows the remote PE to determine which VPNv4 routes should not be imported to a specific VRF instance.
  B. Allows the remote CE to determine which VPNv4 routes to be imported to a specific VRF instance.
  C. Allows the remote PE to determine which VPNv4 routes to be imported to a specific VPN routing and forwarding (VRF) instance.
  D. Allows the remote CE to determine which VPNv4 routes should not be imported to a specific VRF instance.
  A. Allows the remote PE to determine which VPNv4 routes should not be imported to a specific VRF instance.
  C. Allows the remote PE to determine which VPNv4 routes to be imported to a specific VPN routing and forwarding (VRF) instance.

• Question 310:

  Which of the following are used in Ethernet (multiple choices)

  A. Non-standard format MAC address
  B. Multiple access in CSMA/CD
  C. MAC address in canonical format
  D. 802.5 encapsulated frames
  E. 802.3 encapsulated frames
  B. Multiple access in CSMA/CD
  E. 802.3 encapsulated frames