Genesys GE0-807 Online Practice Questions and Exam Preparation

Genesys GE0-807 Online Questions & Answers

• Question 41:

  You have 3 separate remote sites using SIP technology without PBX. One location has one MOH and one MCU server, second location has a one MOH and one treatment server and third site has one MOH and one recording Media Server installed. The whole contact center has a rate of 30calls/sec. What is the minimal number of SIP servers to be installed?

  B. 1
  C. 2
  D. 3
  C. 2

• Question 42:

  Which statements are correct? (Choose 2 answers)

  A. A third-party Softswitch must be integrated with sip server using a CTI link.
  B. If there are multiple outbound dialing rules configured within a single Class of Service (COS), and more than one rule matches the dialed number (containing a similar pattern). SIP Server will choose the outbound dialing rule with the most matched digits in it.
  C. When integrating SIP Server with an approved third-party Softswitch, all SIP endpoints must be registered with the particular Softswitch and not the SIP server.
  D. It is possible to configure Auto Agent Logout after a specific period of Agent inactivity on SIP Server 8.
  B. If there are multiple outbound dialing rules configured within a single Class of Service (COS), and more than one rule matches the dialed number (containing a similar pattern). SIP Server will choose the outbound dialing rule with the most matched digits in it.
  D. It is possible to configure Auto Agent Logout after a specific period of Agent inactivity on SIP Server 8.

• Question 43:

  Which of the following are methods are supported by SIP Server for detecting whether a particular device is unavailable and needs to be placed in Out of Service state? (Choose 2 answers)

  A. Active out of service detection
  B. Passive out of service detection
  C. Auto out of service detection
  D. Presence subscription
  E. Registration
  F. class of service
  D. Presence subscription
  E. Registration

• Question 44:

  Which of the following are SIP messages that SIP Server can map to T-Library messages? Choose 4 answers

  A. ACK
  B. INVITE
  C. INFO
  D. UPDATE
  E. REFER
  F. ANNC
  B. INVITE
  C. INFO
  D. UPDATE
  E. REFER

• Question 45:

  What Type of DN has to be created for SIP Server or Media Server integration using MSML?

  A. Trunk Group
  B. Voice over IP Service
  C. Routing Point
  D. Communication DN
  E. Voice over IP Port
  F. No DN is necessary. Just the SIP Server option "msml-support=true" needs to be set
  B. Voice over IP Service

• Question 46:

  Using SIP default settings, after how many seconds will an endpoint will be marked "out of service" without a response following an INVITE message?

  A. 6 seconds
  B. l0 seconds
  C. 24 seconds
  D. 32 seconds
  A. 6 seconds

• Question 47:

  If you want to represent a Gateway in Configuration Layer, what type of DN do you need to create?

  A. ACD Queue
  B. Extension
  C. Routing Point
  D. Trunk
  E. VoIP Service
  E. VoIP Service

• Question 48:

  Which of the following are valid configurations for Open standard SIP architecture? Choose 2 answers

  A. l SIP Server, 1 Softswitch
  B. 5 SIP Server, l Network SIP Server
  C. 1SIP Server, 1 T-Server
  D. 3 SIP Server, 5 T-Server, l Cisco call Manager
  A. l SIP Server, 1 Softswitch
  C. 1SIP Server, 1 T-Server

• Question 49:

  Which is the valid value from the SDP portion of the re-INVITE message if a call is requested to be put on hold?

  A. m=audio 0 RTP/AVP hold
  B. a=rtpmap:0 hold
  C. a=sendrecv
  D. c=IN IP 0.0.0.0
  E. C=INIP 192.168.1.199
  D. c=IN IP 0.0.0.0

• Question 50:

  When the internal registrar is enabled and SIP Server is also configured to store registration information in the configuration database, where, in CME, can you find the contact option specifying current location?

  A. corresponding DN
  B. corresponding Agent Login
  C. corresponding Voice over IP Service
  D. corresponding SIP Server
  E. It is not visible in CME
  A. corresponding DN