F5 F50-531 Online Practice Questions and Exam Preparation

F5 F50-531 Online Questions & Answers

• Question 21:

  The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool is marked available (green) which situation is sufficient to cause this?

  A. All of the pool member nodes are responding to the ICMP monitor as expected.
  B. Less than 50% of the pool member nodes responded to the ICMP echo request.
  C. All of the members of the pool have had their content updated recently and their responses no longer match the monitor receive rule.
  D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.
  D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.

• Question 22:

  A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP-based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the pool members?

  A. All pool members are up since the HTTP-based monitor is successful.
  B. All pool members are down since the ICMP-based monitor is failing in some cases.
  C. The pool members whose nodes are failing the ICMP-based monitor will be marked disabled.
  D. The pool members whose nodes are failing the ICMP-based monitor will be marked unavailable.
  D. The pool members whose nodes are failing the ICMP-based monitor will be marked unavailable.

• Question 23:

  A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

  A. 200.200.1.1
  B. 150.150.10.11
  C. Floating self IP address on VLAN where the packet leaves the system
  D. Floating self IP address on VLAN where the packet arrives on the system
  C. Floating self IP address on VLAN where the packet leaves the system

• Question 24:

  How is MAC masquerading configured?

  A. Specify the desired MAC address for each VLAN for which you want this feature enabled.
  B. Specify the desired MAC address for each self-IP address for which you want this feature enabled.
  C. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.
  D. Specify the desired MAC address for each floating self-IP address for which you want this feature enabled.
  A. Specify the desired MAC address for each VLAN for which you want this feature enabled.

• Question 25:

  When initially configuring the BIG-IP system using the config utility, which two parameters can be set? (Choose two.)

  A. the netmask of the SCCP
  B. the IP address of the SCCP
  C. the port lockdown settings for the SCCP
  D. the netmask of the host via the management port
  E. the IP address of the host via the management port
  F. the port lockdown settings for the host via the management port
  D. the netmask of the host via the management port
  E. the IP address of the host via the management port

• Question 26:

  A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIG-IP, what will occur to the IP addresses?

  A. Traffic initiated by the pool members will have the source address translated to a self-IP address but the destination address will not be changed.
  B. Traffic initiated to the virtual server will have the destination address translated to a pool member's address and the source address translated to a self-IP address.
  C. Traffic initiated by selected clients, based on their IP address, will have the source address translated to a self-IP address but the destination will only be translated if the traffic is destined to the virtual server.
  D. Traffic initiated to the virtual server will have the destination address translated to a pool member's address and the source address translated to a self-IP address. Traffic arriving destined to other destinations will have the source translated to a self-IP address only.
  B. Traffic initiated to the virtual server will have the destination address translated to a pool member's address and the source address translated to a self-IP address.

• Question 27:

  Under what condition must an appliance license be reactivated?

  A. Licenses only have to be reactivated for RMAs - no other situations.
  B. Licenses generally have to be reactivated during system software upgrades.
  C. Licenses only have to be reactivated when new features are added (IPv6, Routing Modules, etc) - no other situations.
  D. Never. Licenses are permanent for the platform regardless the version of software installed.
  B. Licenses generally have to be reactivated during system software upgrades.

• Question 28:

  Which event is always triggered when the client sends data to a virtual server using TCP?

  A. HTTP_DATA
  B. CLIENT_DATA
  C. HTTP_REQUEST
  D. VS_CONNECTED
  B. CLIENT_DATA

• Question 29:

  Which statement is true concerning cookie persistence?

  A. Cookie persistence allows persistence independent of IP addresses.
  B. Cookie persistence allows persistence even if the data are encrypted from client to pool member.
  C. Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.
  D. If a client's browser accepts cookies, cookie persistence will always cause a cookie to be written to the client's file system.
  A. Cookie persistence allows persistence independent of IP addresses.

• Question 30:

  When configuring a pool member's monitor, which three association options are available? (Choose three.)

  A. inherit the pool's monitor
  B. inherit the node's monitor
  C. configure a default monitor
  D. assign a monitor to the specific member
  E. do not assign any monitor to the specific member
  A. inherit the pool's monitor