Extreme Networks EW0-300 Online Practice Questions and Exam Preparation

Extreme Networks EW0-300 Online Questions & Answers

• Question 61:

  When SSH2 is configured and enabled on a Summit 7i switch, telnet is automatically disabled.

  A. True
  B. False
  B. False

• Question 62:

  There is one ACL type supported by Extreme Networks switches that can only be dealt by the CPU. Which type is it?

  A. IP based
  B. TCP based
  C. UDP based
  D. ICMP based
  D. ICMP based

• Question 63:

  By default all VLANs are assigned to QoS profile QP

  B. 1
  C. 7
  D. 8
  B. 1

• Question 64:

  What is the CLI command to put vlan purple?on physical port 2 into STPD oak?in EMISTP mode?

  A. config stpd oak add port 2 vlan purple emistp
  B. config stpd oak add vlan purple port 2 emistp
  C. config port 2 vlan purple add oak emistp
  D. config vlan purple add stpd oak port 2 emistp
  B. config stpd oak add vlan purple port 2 emistp

• Question 65:

  Select one of the known limitations of DVMRP?

  A. DVMRP is not designed as an IP Multicast routing protocol.
  B. DVMRP needs another Unicast routing protocol like RIP or OSPF
  C. DVMRP is not scable (Max 32 Hops).
  D. DVMRP does not support Poison Reverse.
  C. DVMRP is not scable (Max 32 Hops).

• Question 66:

  IS-IS is a designed to work in conjunction with

  ISO 8473 (The ISO Connectionless Network Layer Protocol) ISO 9542 (The ISO End System to Intermediate System Protocol)

• Question 67:

  Extreme Networks ? chipset switches support the Radius feature. The switch becomes a radius server after enabling this feature and proper configuration

  A. TRUE
  B. FALSE
  B. FALSE

• Question 68:

  What is true about the StpdID?

  A. The StpdID must be equal to one of its member VLAN ID's.
  B. The StpdID may not be equal to one of its member VLAN ID's.
  C. The StpdID may not be equal to any VLAN ID.
  D. It does not matter if the StpdID is equal to a VLAN ID.
  A. The StpdID must be equal to one of its member VLAN ID's.

• Question 69:

  OSPF requires that all areas attach directly to the backbone area, and that all attachments are made with a direct physical connection.

  A. True
  B. False
  B. False

• Question 70:

  What are te differences between a Summit 481 and a Summit 48si? Choose all that apply

  A. A Summit 48i has 2 unpopulated GBIC ports with physical redundancy and a Summit48 si has 2 mini GBIC ports
  B. A Summit 48i is 2 rack units high and a Summit 48si only 1
  C. The Summit 48si runs only on ExtremeWare 6.2.1 and higher
  D. All of these
  D. All of these