Extreme Networks EW0-200 Online Practice Questions and Exam Preparation

Extreme Networks EW0-200 Online Questions & Answers

• Question 181:

  Which statement is true for an Ethernet bridge to perform its basic functionality?

  A. An Ethernet Bridge learns MAC source addresses
  B. An Ethernet Bridge learns MAC destination addresses
  C. An Ethernet Bridge learns IP source addresses
  D. An Ethernet Bridge learns IP destination addresses
  A. An Ethernet Bridge learns MAC source addresses

• Question 182:

  What CLI command will accomplish the selection of the secondary software image the next time the switch is rebooted?

  USE IMAGE SECONDARY

• Question 183:

  What is the maximum number of VLANs that can be tagged on a single link between Extreme Networks switches.

  A. 1000
  B. 2000
  C. 4095
  D. 6000
  C. 4095

• Question 184:

  You would use the __________________ CLI command to turn off ECMP.

  DISABLE IP ROUTE SHARING

• Question 185:

  Which CLI command would you use to configure the switch to ignore STP for selected VLANs?

  A. enable ignore-stp vlan
  B. enable ignore-bpdu stpd vlan
  C. enable ignore-bpdu stpd
  D. enable ignore-stp vlan
  D. enable ignore-stp vlan

• Question 186:

  What is a CP SYN?request?

  A. A request from a TCP client to synchronize an FTP session
  B. A request from a TCP station to establish a TCP session to another station
  C. A request from a TCP server to re-send telnet data
  D. TCP client to server keep-alive
  B. A request from a TCP station to establish a TCP session to another station

• Question 187:

  What happens when one executes the CLI command: unconfigure switch all?

  A. Resets configuration to factory defaults without a reboot
  B. Erases the entire current configuration without a reboot
  C. Erases the configuration selected for next reboot, resets to factory defaults and reboots the switch
  D. Erases both configurations and reboots the switch
  C. Erases the configuration selected for next reboot, resets to factory defaults and reboots the switch

• Question 188:

  RIP supports the distribution of non-originated RIP routes using a command beginning with: enable rip export.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 189:

  Which of the following routes will be used to forward a frame to 192.168.1.174?

  A. 192.168.1.0/29
  B. 192.168.1.128/30
  C. 192.168.1.128/25
  D. None of these.
  C. 192.168.1.128/25

• Question 190:

  The maximum number of OSPF virtual links that an Extreme Summit1i switch can support is 32.

  A. TRUE
  B. FALSE
  A. TRUE