Extreme Networks EW0-200 Online Practice Questions and Exam Preparation

Extreme Networks EW0-200 Online Questions & Answers

• Question 171:

  In ExtremeWare, the bridging table of learned MAC addresses and static MAC addresses is called the:

  FDB

• Question 172:

  Which of the following methods can be used to access an Extreme Networks switch?

  A. SNMP
  B. RS-232
  C. Telnet
  D. HTTP
  E. All of the above
  E. All of the above

• Question 173:

  What is the maximum number of simultaneously active protocol filters in the switch for all ?based Extreme switch products?

  A. 7
  B. 14
  C. 15
  D. None of these
  C. 15

• Question 174:

  Is this a valid CLI command : enable ignore-stp vlan default?

  A. TRUE
  B. FALSE
  A. TRUE

• Question 175:

  The CLI command to prevent VLAN corporate from forwarding broadcast traffic for ports 2:2-2:6 is: config vlan corporate add ports 2:2-2:6 nobroadcast.

  A. TRUE
  B. FALSE
  A. TRUE

• Question 176:

  What command would you use to add a new SNMP read-write community string called u.nt.b9?on your switch?

  A. config snmp community readwrite eu.nt.b9
  B. config snmp add community readwrite eu.nt.b9
  C. create snmp readwrite community eu.nt.b9
  D. create snmp add readwrite community eu.nt.b9
  B. config snmp add community readwrite eu.nt.b9

• Question 177:

  The modular BlackDiamond 6816 switch offers how many slots?

  A. 4 I/O module slots and 2 MSM slots
  B. 8 I/O module slots and 2 MSM slots
  C. 16 I/O module slots and 2 MSM slots
  D. 16 I/O module slots and 4 MSM slots
  D. 16 I/O module slots and 4 MSM slots

• Question 178:

  Which statement is true?

  A. When a bridge is root-bridge all its ports are root ports.
  B. When a bridge is root-bridge only one of its ports is root port.
  C. When a bridge is root-bridge none of its ports is root port.
  D. None of the above
  C. When a bridge is root-bridge none of its ports is root port.

• Question 179:

  Which of the following CLI command line statements will configure an IP address on the default VLAN?

  A. config vlan default xnetid 192.168.1.1 255.255.255.0
  B. config default ipaddress 192.168.1.1/24
  C. enable vlan default ipaddress 192.168.1.1 255.255.255.0
  D. enable vlan default xnetid 192.168.1.1/24
  B. config default ipaddress 192.168.1.1/24

• Question 180:

  The OSPF Area 0.0.0.0 is always pre-configured on an Extreme switch as a ___________ area type.

  A. Stub
  B. NSSA
  C. Normal
  D. None of these
  C. Normal