EMC E20-690 Online Practice Questions and Exam Preparation

EMC E20-690 Online Questions & Answers

• Question 51:

  You are on a customer site to perform a software upgrade on a VNX Unified storage system. You have worked with the customer to install USM on the system that has IP connectivity to the VNX system and the Internet. What is the behavior of the Download Software Updates Wizard in USM?

  A. It advises the user of the current versions of software on the system and then requires the user to navigate to Powerlink for the downloads of the appropriate software upgrade versions.
  B. The user must manually look for the current versions of software on the system and then must manually navigate to Powerlink for the downloads of the appropriate software upgrade versions.
  C. It advises the user of the current versions of software on the system and then connects the user to Powerlink for the downloads of the appropriate software upgrade versions.
  D. The user must manually look for the current versions of software on the system and then the wizard connects the user to Powerlink for the downloads of the appropriate software upgrade versions.
  C. It advises the user of the current versions of software on the system and then connects the user to Powerlink for the downloads of the appropriate software upgrade versions.

• Question 52:

  When using USM to download software updates, what is the default location where the software is stored?

  A. C:\EMC\repository\Downloads\VNX
  B. C:\EMC\Downloads\VNX
  C. C:\Program Files\EMC\repository\Downloads
  D. C:\EMC\repository\VNX\Downloads
  A. C:\EMC\repository\Downloads\VNX

• Question 53:

  How would you connect to an SP in a degraded state to retrieve SPCollects?

  A. RemotelyAnywhere
  B. Unisphere
  C. HyperTerminal or PuTTY
  D. Unisphere Client
  A. RemotelyAnywhere

• Question 54:

  You are tasked with running CLI commands. You discover that SPB is responsive, but SPA is in a degraded mode. If running commands from SPB, what is the function of the speclcli - issuePeerNMIcommand?

  A. Triggers a panic dump on SPA
  B. Triggers a panic dump on SPB
  C. Display the startup progress on SPA
  D. Display the startup progress on SPB
  A. Triggers a panic dump on SPA

• Question 55:

  Where can documentation for installing and set up of the ESRS IPclient suite be found?

  A. VNX Procedure Generator
  B. Primus
  C. The install document shipped with the array
  D. ELab Advisor
  A. VNX Procedure Generator

• Question 56:

  A customer has a Unified VNX field installed in their rack. All documentation materials included in the original shipment are stored in the rack. Which item from the original package can be used to verify and label cabling prior to an FRU replacement procedure?

  A. The Installation Guide
  B. The packing list
  C. The Resource CD
  D. The unpacking instructions
  A. The Installation Guide

• Question 57:

  You are working on a VNX Unified system that has a fault LED illuminated on the DME. What action would you take to further analyze the system status?

  A. Launch USM and capture diagnostic data from the system.
  B. Install VNX Analyzer to capture the DME hardware status.
  C. Perform a background verify operation on the control LUNs.
  D. Trespass the control LUNs to the peer storage processor.
  A. Launch USM and capture diagnostic data from the system.

• Question 58:

  After a new VNX 5400 was installed and powered up, the Data Movers are continuously rebooting. It has been determined that a cabling issue is at fault. Which configuration should be checked first as the most likely cause?

  A. Data Mover to SP FC cabling
  B. SPS to vault DAE cabling
  C. Blade Enclosure network cabling
  D. DAE SAS cabling
  A. Data Mover to SP FC cabling

• Question 59:

  How can users search for hardware issues on a VNX for File storage system using EMC Unisphere?

  A. Once logged in to Unisphere, use the drop-down list to select System > Storage Hardware for File
  B. Once logged in to Unisphere, use the drop-down list to select System > Storage Hardware for Block
  C. Once logged in to Unisphere, navigate to the dashboard section and select System > Storage Hardware for File
  D. Once logged in to Unisphere, navigate to the dashboard section and select System > Storage Hardware for Block
  A. Once logged in to Unisphere, use the drop-down list to select System > Storage Hardware for File

• Question 60:

  When using VNX Installation Assistant to register a VNX system, which three methods can you use to transmit the registration and configuration package to EMC?

  A. Automatic upload, manual upload utility, default email client
  B. Automatic upload, default email client, Powerlink upload page
  C. Manual upload utility, Powerlink upload page, SPcollect
  D. Automatic upload, SPcollect, default email client
  A. Automatic upload, manual upload utility, default email client