EMC DCS-IE DES-4122 Questions & Answers

• Question 41:

  Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?

  A. Accessing RACADM running the Dell Toolkit

  B. Accessing RACADM with OpenManage software

  C. Logging into iDRAC using SSH or Telnet

  D. Logging into iDRAC through Boot Manager

  Correct Answer: C

• Question 42:

  A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.

  What action should a technician take to help accomplish this goal?

  A. Configure servers to access the remote firmware repository

  B. Enable the Match Firmware of Replaced Part setting in the system BIOS

  C. Install and configure a repository manager

  D. Enable the Collect System Inventory On Restart (CSIOR) attribute

  Correct Answer: A

• Question 43:

  A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC

  What should the technician do to verify iDRAC connectivity on each server?

  A. iDRAC Datacenter license is installed.

  B. Ethernet port LOM1 is cabled and the link light is green.

  C. iDRAC dedicated NIC port is cabled and the link light is green

  D. iDRAC Enterprise license is installed

  Correct Answer: C

• Question 44:

  An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: C

• Question 45:

  What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

  A. SupportAssist Enterprise

  B. iSM

  C. OpenManage Essentials

  D. iDRAC9

  Correct Answer: C

• Question 46:

  After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.

  Which setting should be changed?

  A. Rebuild Rate in the BIOS settings

  B. System Profile to Performance in the BIOS settings

  C. System Profile to Performance in the iDRAC GUI

  D. Rebuild Rate in the iDRAC GUI

  Correct Answer: D

• Question 47:

  What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?

  A. Ensures that the installed operating system is authentic

  B. Ensures that the server has a valid Service Tag number

  C. Ensures that no unauthorized BIOS or firmware codes are run

  D. Ensures that the server boots only when connected to a verified network

  Correct Answer: C

• Question 48:

  An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment

  The inventory consists of:

  

  The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb

  What additional component(s) is needed for this configuration?

  A. Hot-plug power supply, 750 W - qty 1

  B. Hot-plug power supply, 1100W - qty 1

  C. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2

  D. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2

  Correct Answer: D

• Question 49:

  A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.

  Which setting should the technician change in Processor Settings in the System BIOS?

  A. System Profile

  B. Virtualization Technology

  C. HyperThreading

  D. Number of Cores per Processor

  Correct Answer: A

• Question 50:

  What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

  A. Firmware: Upgrade to latest available version Configuration Apply always

  B. Firmware Allow version upgrade only Configuration: Disabled

  C. Firmware: Match firmware of replaced part Configuration Apply always

  D. Firmware Disabled Configuration Apply only if firmware match

  Correct Answer: C