A technician is sent-on-site to troubleshoot a server that reports errors during POST when rebooted. The following error message is displayed: "Correctable memory error rate exceeded for DIMM B4". The LCD is amber. The server has a limited maintenance window so the technician needs to troubleshoot efficiently.
What should the technician do?
A. Swap DIMM with A4 to narrow down the issue
B. Replace DIMM B4 as time is limited
C. Swap DIMM B4 with B2
D. Reseat all memory
A server is being up as a VMware ESXi host. A technician needs to install the OS on an internal SD card. They install the SD card. However, during OS installation, the SD card is not visible.
What should the technician do to fix the issue?
A. Enable the SD card in the BIOS Settings
B. Format the SD card with an EXT3 partition before installation
C. Move the SD card from slot 2 to slot 1
D. Use Lifecycle Controller to install the SD card
A user has a server with only one processor installed with 6x 32 GB RDIMMs. A technician was asked to install a second processor. After installing the second processor, the technician finds that the second processor is not operational.
What should be done to make the second processor operational?
A. The second CPU socket needs to be enabled
B. Logical processing must be enabled in the BIOS
C. The iDRAC license needs to be at either Express or Enterprise levels
D. The RDIMMs need to be moved so that there are three RDIMMs on each CPU
A technician needs to update the iDRAC license on a PowerEdge R740 server from Express to Enterprise. The server has the following components:
2x CPUs 384 GB RAM 6x 1 TB drives 1x PSU
The server is powered down but connected to active AC. The user wants it to stay powered down and not connect to any networks. No errors are presently displayed.
How can the technician upgrade the license?
A. The license cannot be upgraded because the user will not allow the server to be powered on
B. The license cannot be upgraded on a single PSU system
C. Power on the server then connect to the iDRAC and upgrade iDRAC license before powering the server down
D. Connect to the iDRAC GUI and upgrade the iDRAC license while the server is powered down.
A technician is changing the iDRAC IP address from the static IP address 10.37.125.88 to DHCP on the technician's PowerEdge R640 that does not have a front LCD. After completing this task, they are unable to determine which IP address was given to the iDRAC and they cannot reboot the server.
What method could the technician use to determine that IP address is assigned to the iDRAC?
A. Use the iDRAC Direct feature. Access iDRAC web GUI and determine the assigned IP address
B. Plug a monitor or KVM into the system. Reboot the server to view the assigned IP iDRAC address on the Dell boot up splash screen
C. Log in to the Lifecycle and check the iDRAC Settings.
D. Hold the system identification button down for more than 3 seconds to reset it back to the default static address 192.168.0.120
A new Dell customer is ordering servers that have very specific firmware dependencies. Any replaced
parts of the same type must match the replaced original part identically. The procedure must be as simple
as possible with minimal risk.
What action should a technician take to accomplish this goal?
A. Enable the Match Firmware of Replaced Part setting in the system BIOS
B. Install and configure a repository manager
C. Configure servers to access the remote firmware repository
D. Enable the Collect System Inventory On Restart (CSIOR) attribute
A technician is on-site to update firmware on a server for which the iDRAC is not configured. In addition, the technician does not have access to the OS. However, the site does have DHCP available on the production network as well as on an available workstation. The technician has access to the rack-mounted KVM.
How should the technician update the firmware on the server?
A. Reboot the server, select F10, configure the network, and run Firmware Update
B. Reboot the server, select F2, configure the network, and run Firmware Update
C. Log in via telnet through a serial cable and configure the workstation as a proxy, then downloaded the firmware
D. Log in via SSH through a serial cable and configure the workstation as a proxy, then download the firmware
A system administrator needs to install OpenManage Server Administrator on 200 servers. What is the quickest way to meet this requirement?
A. Use the Lifecycle Controller to install OpenManage Server Administrator on each server.
B. Install OME and push OpenManage Server Administrator to all 200 servers.
C. Use Microsoft utilities to automate the deployment of OpenManage Server Administrator.
D. Download OpenManage Server Administrator from Dell.com and install on each server.
A technician replaces a faulty system board on a server. In addition to powering on the system, what step must the technician take to install the correct service tag?
A. Type asset
B. Login in to the iDRAC
C. Press F11 to start the Boot Manager
D. When prompted by Easy Restore, press Y to restore the Service Tag, license, and diagnostics information
A technician receives an email alert that one of the drives on a server has failed. Upon replacing the bad drive, they receive a second email alert that the same drive has failed. The technician installs the replacement drive in another server and it works correctly.
What is a valid troubleshooting step for this issue?
A. Replace the PERC
B. Recreate the RAID array
C. Perform a full initialization on the replacement drive
D. Verify that the drive firmware is up to date
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your DES-4121 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.