EMC D-VXB-DY-A-24 Online Practice Questions and Exam Preparation

EMC D-VXB-DY-A-24 Online Questions & Answers

• Question 41:

  DRAG DROP

  Match each team member with their RACI role.

  Select and Place:

  

  

• Question 42:

  A VxBlock 1000 is running VMware vSphere 6.7. To support an audit, a customer engineer is trying to map the networking components in the VxBlock to a traditional datacenter architecture.

  Which component should the engineer map to the access switch?

  A. VMware virtual distributed switch
  B. Fabric Interconnect
  C. Nexus 1000V switch
  D. Nexus 9306PX switch
  B. Fabric Interconnect

• Question 43:

  A customer is planning to integrate a VxBlock to a new Cisco ACI fabric. What major physical connectivity change is needed if the customer intends to convert their existing VxBlock Nexus 9396PX switches to ACI mode?

  A. Connect the switch directly to the APIC to download the ACI software. Then connect the existing Nexus 9396PX switches to a spine Nexus 93180YC switch.
  B. Remove the dual peer link connection but keep the peer link connection for ACI fabric heartbeat traffic exchange.
  C. Connect the Nexus 9396PX switch to spine Nexus 9500 switches. Remove other connections between the Nexus 9396PX switches.
  D. Nexus 9396PX switch cannot be integrated directly to ACI fabric.
  A. Connect the switch directly to the APIC to download the ACI software. Then connect the existing Nexus 9396PX switches to a spine Nexus 93180YC switch.

• Question 44:

  What is the block size of the OneFS operating system?

  A. 32 KB
  B. 64 KB
  C. 8 KB
  D. 16 KB
  C. 8 KB

• Question 45:

  A customer has a physical server connected to an ACI fabric. The server was recently moved to a different leaf switch within the ACI fabric. The IP address of this server was also changed but is still part of its original EPG. What is a consideration once the correct port configuration is pushed from the APIC?

  A. The host must be removed, and the connections need to be re-assigned.
  B. No configuration changes are required on the ACI fabric.
  C. The switch must be moved with the machine to the new site.
  D. The contract needs to be updated to reflect the new IP address.
  B. No configuration changes are required on the ACI fabric.

• Question 46:

  You are testing a recently expanded VxBlock 1000. How can you verify that the hosts can communicate with XtremIO?

  A. Deactivate the storage controller
  B. Failover the Data Mover
  C. Reboot the BBU
  D. Power off a ToR switch
  D. Power off a ToR switch

• Question 47:

  A customer is using Cisco UCS 6332-16UP 40-Port Fl. They have 16 ports dedicated for FC traffic. The customer needs to increase the number of FC ports. What is a consideration?

  A. Unused server ports can be converted to FC ports
  B. Maximum number of supported FC ports is 32
  C. Unused FCoE ports can be converted to FC ports
  D. Maximum number of supported FC ports is 16
  A. Unused server ports can be converted to FC ports

• Question 48:

  A System Engineer is validating system cabling for a VxBlock 1000. They find that some ports on Fabric Interconnects 1A are not connected. Which connections are missing?

  A. Network uplinks to Nexus switches
  B. Network uplinks to the customer network
  C. SAN uplinks to MDS switches
  D. Server uplinks to C-Series servers
  D. Server uplinks to C-Series servers

• Question 49:

  A System Engineer is working on an implementation of the VxBlock 1000. What is a required task in the final implementation step during the Deployment Phase?

  A. Verify system physical configuration against LCS
  B. Execute the agreed-upon test plan
  C. Configure Cisco Smart Call Home
  D. Connect to individual Element Managers
  B. Execute the agreed-upon test plan

• Question 50:

  What is a licensed feature of Isilon OneFS?

  A. InsightIQ
  B. SMARTCONNECT
  C. SMARTPOOL
  D. SynclQ
  C. SMARTPOOL