EMC D-VXB-DY-A-24 Online Practice Questions and Exam Preparation

EMC D-VXB-DY-A-24 Online Questions & Answers

• Question 21:

  A System Engineer has completed a VxBlock 1000 system installation. What needs to be validated?

  A. Storage processors are online and operational
  B. Network switches are installed as per the Build Guide
  C. Management hosts are installed as per the Build guide
  D. Configuration of network, storage, compute, and virtualization
  D. Configuration of network, storage, compute, and virtualization

• Question 22:

  What is a primary use of the RCM Assessment Workbook?

  A. Collect the health report of all VxBlock remediation components
  B. Create the upgrade plan for the ToR switch only
  C. Identify items and components that require remediation
  D. Create the upgrade plan for Compute only
  C. Identify items and components that require remediation

• Question 23:

  What type of topology does the ACI fabric use?

  A. Spine Leaf
  B. Tree
  C. Hierarchical
  D. Flat
  A. Spine Leaf

• Question 24:

  A customer site has a VM in the VxBlock dedicated to a multicast application. The network monitoring team observes heavy network utilization each time the video streaming isrequested. What should be enabled to address this issue?

  A. LACP
  B. vPC
  C. IGMP
  D. VTP
  C. IGMP

• Question 25:

  Based on CPSD guidelines for VxBlock 1000, how many UCS chassis can be installed in a single rack?

  A. 5
  B. 4
  C. 6
  D. 7
  C. 6

• Question 26:

  What is the purpose of the Knowledge Transfer process with the customer?

  A. Introduce the customer team to their new converged or hyperconverged system
  B. Provide generic information about VxBlock and its benefits
  C. Provide in-depth training of the solution
  D. Provide documents on critical items, such as naming conventions, IP address ranges, and component configurations
  A. Introduce the customer team to their new converged or hyperconverged system

• Question 27:

  A user cannot connect to Management switch 3172TQ. During troubleshooting it was discovered that the wrong IP was used in the SSH client. What IP address should be used to establish the SSH connection to the Management switch?

  A. 192.168.1.1
  B. 10.10.10.2
  C. 192.168.1.2
  D. 10.10.10.1
  D. 10.10.10.1

• Question 28:

  DRAG DROP

  What order of steps is taken when using an NSX edge service gateway with proxy mode load balancing?

  Select and Place:

  

  

• Question 29:

  How many VMs are required by VxBlock Central to support an RCM upgrade?

  A. 4
  B. 3
  C. 1
  D. 2
  B. 3

• Question 30:

  A standard virtual switch is deployed on an ESXi host. Four virtual machines are connected to the vSwitch, which has no uplink ports configured. Which statement is accurate about network connectivity between the VMs?

  A. All VMs can communicate, but only with one another.
  B. VMs can only communicate with one another if virtual guest tagging is used.
  C. No communication is possible between VMs.
  D. VMs can communicate to outside networks if CDP is being used.
  A. All VMs can communicate, but only with one another.