CWNP CWT-100 Online Practice Questions and Exam Preparation

CWNP CWT-100 Online Questions & Answers

• Question 31:

  What is used as a mid-span Power over Ethernet (PoE) power source equipment (PSE) device? Select one:

  A. Switch
  B. Router
  C. Controller
  D. PoE injector
  D. PoE injector

• Question 32:

  In what way are 802.11 channels defined?

  A. By a high frequency and channel width
  B. By channel width alone
  C. By a center frequency and channel width
  D. By a low frequency and channel width
  B. By channel width alone

• Question 33:

  Some APs come with a captive portal available within the AP, controller or cloud interface. For what would this captive portal most likely be used?

  A. Guest access
  B. Employee access
  C. Executive management access
  D. Long-term contractor access
  A. Guest access

• Question 34:

  What 802.11 process must always occur before 802.11 association?

  A. Time synchronization
  B. Authentication
  C. Confidentiality
  D. Encryption
  B. Authentication

• Question 35:

  An AP specifies that it requires 802.3af Power over Ethernet (PoE). What is the maximum power this AP could draw? Select one:

  A. 25.5 W
  B. 30 W
  C. 15.4 W
  D. 12.95 W
  C. 15.4 W

• Question 36:

  An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port. For most enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?

  A. 1
  B. 3
  D. 2
  A. 1

• Question 37:

  A device is a 3x2:2 device. How many spatial streams can it receive?

  A. 3
  B. 9
  C. 6
  D. 2
  D. 2

• Question 38:

  In what kind of device is a mini-PCIe 802.11 adapter most likely to be used?

  A. Desktop
  B. Mobile phone
  C. Laptop
  D. USB adapter
  C. Laptop

• Question 39:

  What process is used after authentication to generate and install encryption keys on 802.11 devices using WPA2?

  A. 802.1X port-based authentication
  B. Passphrase to PSK mapping algorithm
  C. EAP authentication
  D. 4-way handshake
  D. 4-way handshake

• Question 40:

  You configured an AP for 802.1X/EAP authentication. You also configured several clients for the same. The clients cannot authenticate to the WLAN. When you look at the RADIUS server logs, you see that no authentication attempts have been made. Other services use the same RADIUS server without problems. At what location should you check the configuration for errors?

  A. Clients
  B. AP
  C. None of these
  D. RADIUS Server
  B. AP