CWNP CWT-100 Online Practice Questions and Exam Preparation

CWNP CWT-100 Online Questions & Answers

• Question 21:

  What device type is configured to respond when a probe request is received in a BSS?

  A. Desktop
  B. Switch
  C. Laptop
  D. AP
  D. AP

• Question 22:

  When configuring a standalone AP with a web-based interface, what should be changed to protect the HTTP interface used to manage the AP?

  A. Admin account password
  B. WPA2 passphrase
  C. SSID
  D. WPA passphrase
  A. Admin account password

• Question 23:

  You have configured a WLAN profile on a client computer for a hidden SSID network. The SSID operates in both 2.4 GHz and 5 GHz. The profile never connects or even attempts to connect. What is the most likely configuration error in the profile or on the computer?

  A. Wrong passphrase
  B. Band selection is configured for 5 GHz-only
  C. Wrong SSID
  D. Band selection is configured for 2.4 GHz-only
  C. Wrong SSID

• Question 24:

  EAP-TLS is used for 802.1X/EAP authentication on your WLAN. What must be installed on all client devices that connect using this method?

  A. RADIUS shared secret
  B. RADIUS IP address
  C. Certificate
  D. EAP-TLS DLL
  C. Certificate

• Question 25:

  How many non-overlapping channels are available in regulatory domains in the 2.4 GHz frequency band? Select one:

  A. 14
  B. 1
  C. 3
  D. 11
  C. 3

• Question 26:

  When three APs are placed within ten meters of each other and use the same channel, but are not Single Channel Architecture (SCA) APs, what problem will be exaggerated?

  A. Non-Wi-Fi interference
  B. Antenna misalignment
  C. ACI
  D. CCI
  D. CCI

• Question 27:

  What Windows Command Prompt command may be used to configure wireless settings on Windows computers?

  A. TRACERT
  B. PING
  C. NETSH
  D. IPCONFIG
  C. NETSH

• Question 28:

  You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas. What is most likely problem in that area?

  A. High SNR
  B. Improper AP security configuration
  C. Poor signal strength
  D. Improper client security configuration
  C. Poor signal strength

• Question 29:

  In addition to modulation, coding and spatial streams, what has the most impact on available data rates in a WLAN link?

  A. Output power of the AP above 100 mW
  B. Output power of the client above 100 mW
  C. Antenna gain above 11 dBi
  D. Channel width
  D. Channel width

• Question 30:

  What AP configuration option is often thought to provide security but actually provides no security because of the simple spoofing attack weakens it?

  A. MAC filtering
  B. WEP
  C. Shared Key Authentication
  D. SSID hiding
  A. MAC filtering