CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 71:

  An organization is implementing a new WLAN. They are upgrading a very old 802.11g network that only a few devices used Now. they expect more than 250 devices to use the new WLAN that will operate 802.11ax Aps. What wired-side consideration should you address in your design recommendations?

  A. DHCP pools
  B. Spanning-tree loops
  C. Modem pools
  D. Client ARP tables
  A. DHCP pools

• Question 72:

  ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is connected to an access port on a layer-2 Ethernet switch. Each layer-2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN controller is connected directly to the layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN controller. A voice server is connected to the layer-3 Ethernet switch.

  When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA's IP data packet gets mapped to what and by which device?

  A. The DSCP value is mapped to an IEEE 802.1Q priority tag value by the WLAN controller.
  B. The DSCP value is mapped to the DSCP value in the encapsulating IP header by the layer-3 switch.
  C. The DSCP value is mapped to an IEEE 802.1p (802.1D-2004) UP value by the access point.
  D. The DSCP value is mapped to an IEEE 802.1Q VLAN tag by the access point.
  A. The DSCP value is mapped to an IEEE 802.1Q priority tag value by the WLAN controller.

• Question 73:

  Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash "--". Choose the answer option that correctly fills in both blanks in the following sentence. A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.

  A. Block stations with inadequate security parameters -- SSID
  B. Identify voice-enabled wireless devices -- AP radio (that is, 2.4 GHz or 5 GHz)
  C. Regulate the available bandwidth resources -- Access Category
  D. Mark ingress and egress frames with priority values -- TCP/IP port
  C. Regulate the available bandwidth resources -- Access Category

• Question 74:

  One of your warehouse customers called you reporting problems with their WLAN in some locations that you designed and installed over a year ago. What should be one of your first considerations for your line of questioning? Response:

  A. DHCP lease exhaustion
  B. Changes in receive gain
  C. Inventory changes
  D. Rogue APs from neighbors
  C. Inventory changes

• Question 75:

  What document is typically created to launch a project?

  A. Bill of Materials
  B. Project Charter
  C. Work Breakdown Structure
  D. Budget
  B. Project Charter

• Question 76:

  During a customer walkthrough you notice an area of the CAD drawing where it is not accurate. What next step should you take? Response:

  A. Redraw the portions of the map that have changed.
  B. Do not survey that area.
  C. Request a new version.
  D. Request the survey team to do their best to walk where necessary and use the references on the map.
  C. Request a new version.

• Question 77:

  During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band becomes intermittent. At other times of the day, it works fine. What is the most likely cause of this issue?

  A. Employees are using their cell data instead of using the Wi-Fi
  B. The AP in the cafeteria keeps rebooting due to lack of PoE budget on the switch
  C. Toasters and ovens are heating up the air, raising the noise floor with the Wi-Fi on the 2.4 GHz band
  D. Microwaves in the cafeteria are interfering with the Wi-Fi on the 2.4 GHz band
  D. Microwaves in the cafeteria are interfering with the Wi-Fi on the 2.4 GHz band

• Question 78:

  What functions may be performed by a WIPS?(Choose all that apply.) Response:

  A. Distributed protocol analysis
  B. Client access to the distribution system
  C. Performance monitoring and response
  D. Data forensics and analysis
  E. Automated threat mitigation
  A. Distributed protocol analysis
  C. Performance monitoring and response
  D. Data forensics and analysis
  E. Automated threat mitigation

• Question 79:

  What document can be useful when determining client capabilities in a WLAN design project?

  A. Bill of Materials
  B. Certificate of ownership
  C. Purchase receipt
  D. Specifications sheet
  D. Specifications sheet

• Question 80:

  Which type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?

  A. WPA2/AES Personal
  B. WPA2/TKIP Enterprise
  C. WPA2/AES Enterprise
  D. WPA/TKIP Personal
  C. WPA2/AES Enterprise