CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 241:

  In what circumstance would you not enable DFS channels on a WLAN infrastructure?

  A. In any stadium
  B. In any office complex
  C. In an airport
  D. In any home office
  C. In an airport

• Question 242:

  As you plan a WLAN upgrade, you have assessed the network requirements and data signatures of your applications. One of the popular applications used on your network requires high bandwidth and low to medium Wi-Fi loss, but can tolerate moderate latency and jitter.

  What application matches this description?

  A. Voice
  B. Email
  C. Skype chat
  D. Video-on-demand
  B. Email

• Question 243:

  After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?

  A. Set the transmit power for all APs
  B. Add pictures of the environment
  C. Nothing; just begin by adding APs, antenna and attenuators
  D. Calibrate the floor plan to increase accuracy
  D. Calibrate the floor plan to increase accuracy

• Question 244:

  Excessive uplink RTP frame retransmissions can result in ____________.

  A. Deauthentication of the transmitter by the receiver
  B. Lowering of the data transmission rate by the transmitting station
  C. MOS scores in excess of 5
  D. Head-of-Line blocking at the receiver
  B. Lowering of the data transmission rate by the transmitting station

• Question 245:

  A cable with 2.5 dB of loss is used to measure the return loss of an antenna. The measured value in-band is shown to be larger than 20 dB. What is the actual return loss of the antenna, and is it considered to be a reasonable value? Response:

  A. Larger than 15 dB and yes
  B. Larger than 15 dB and maybe
  C. Larger than 17.5 dB and yes
  D. Larger than 17.5 dB and no
  A. Larger than 15 dB and yes

• Question 246:

  What type of site survey helps determine if roaming is functioning as intended?

  A. Passive
  B. Predictive
  C. Active
  D. Spectrum analysis walkthrough
  C. Active

• Question 247:

  According to IEEE 29148-2018, which of the following is a characteristic of a requirements set that is not a characteristic of an individual requirement statement?

  A. Comprehensible
  B. Feasible
  C. Necessary
  D. Verifiable
  A. Comprehensible

• Question 248:

  Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based type of authentication where both the client and server require certificates. Which EAP type would be the best fit?

  A. EAP-FAST
  B. EAP-TTLS
  C. EAP-TLS
  D. PEAP
  C. EAP-TLS

• Question 249:

  ABC Manufacturing has a heavily-used dual-band (2.4 / 5 GHz) WLAN, but sporadic RF interference across the 2.4 GHz band is causing dropped VoWiFi calls and leading to data connectivity and throughput problems. In addition to avoiding 2.4 GHz channels and installing a distributed spectrum analyzer to locate RF interference sources, what should the implementer do to resolve the problem fully?

  A. Have only guest access on the 5 GHz channels.
  B. Move all corporate data clients and VoWiFi devices to the 5 GHz channels appropriate for their regulatory domain.
  C. Use captive portals for guest authentication in 5 GHz.
  D. Implement WPA-PSK everywhere in the network.
  B. Move all corporate data clients and VoWiFi devices to the 5 GHz channels appropriate for their regulatory domain.

• Question 250:

  When using a predictive design tool, you have selected access points (APs) with an antenna gain of 3 dBi and set the transmit power to 25 mW. What is the EIRP (Effective Isotropic Radiated Power) of the APs in this design?

  A. 11 dBm
  B. 6.25 mW
  C. 125 mW
  D. 17 dBm
  D. 17 dBm