CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 231:

  You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?

  A. Verify that the shared secret between the authenticator and the RADIUS server is correct
  B. Reboot the clients
  C. Reboot the server
  D. Restart the RADIUS service
  A. Verify that the shared secret between the authenticator and the RADIUS server is correct

• Question 232:

  Who should be in the final meeting from the customer-side after successfully implementing a WLAN infrastructure?

  A. CEO or CFO
  B. End-users
  C. The customer's customers
  D. Remote workers
  B. End-users

• Question 233:

  What roaming technology uses stored keys at the APs for roam back if a client STA returns after having roamed away? Response:

  A. SCA roaming
  B. Preauthentication
  C. OKC
  D. PMK caching
  D. PMK caching

• Question 234:

  What power management feature introduced in 802.11ax, but not available in 802.11ac or 802.11n, is designed to improve battery life for WLAN devices?

  A. WMM-Power Save
  B. Legacy Power Save
  C. TWT
  D. OFDMA
  C. TWT

• Question 235:

  You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?

  A. Personal Protective Equipment (PPE)
  B. Low gain antennas
  C. Low power APs
  D. Indoor APs
  A. Personal Protective Equipment (PPE)

• Question 236:

  Prior to meeting with the customer for the first time, you should do which of the following? Response:

  A. Decide which vendor they will benefit most from.
  B. Research the customer as much as possible. Try to understand what their business is, who their customers are, and any other information you can find regarding product lines and recent press announcements.
  C. Find out what vendor their competitors use.
  D. Plan an initial design to present to them.
  B. Research the customer as much as possible. Try to understand what their business is, who their customers are, and any other information you can find regarding product lines and recent press announcements.

• Question 237:

  You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.

  The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking. How would you possibly characterize this situation?

  Response:

  A. Scope creep has occurred.
  B. The 802.3af RTLS standard should be incorporated into the AP configuration.
  C. The 802.11g standard incorporates location tracking.
  D. Any WLAN will support location tracking.
  E. The power requirements on the UPS need to be evaluated.
  A. Scope creep has occurred.

• Question 238:

  During a validation site survey, you realize that the installers mounted some of the APs on the wait when the design called Tor a celling mount. They said that this was done because the cabling company did not have the right tools to run the cables above the ceiling. You know that this will cause a difference in how the Wi-Fi signal will radiate throughout the environment. What should you do in this case?

  A. Leave it as it is because it will not have a significant impact
  B. Blame the cabling company it the Wi-Fi doesn't work since they didnot do their job correctly
  C. Turn up the power on the APs to accommodate for the difference
  D. Advise the stakeholder that requirements will not be met and a new design process will be needed to meet the requirements
  D. Advise the stakeholder that requirements will not be met and a new design process will be needed to meet the requirements

• Question 239:

  Why should band steering algorithms allow stations to connect to the 2.4 GHz band after ignoring a certain number of Probe Requests?

  A. Because the FCC requires it
  B. Because some clients are persistent clients that will not move to the 5 GHz band
  C. Because the 802.11 standard requires it
  D. Because the AP will experience a buffer overflow if they do not eventually respond with a Probe Response
  B. Because some clients are persistent clients that will not move to the 5 GHz band

• Question 240:

  What are the deliverables to your customer after successfully implementing a WLAN infrastructure?

  A. Digital or physical assets, guides, floorplans and configuration documents
  B. Project Charter
  C. Facility blueprints
  D. Nothing is required. The implemented WLAN was deliverable
  A. Digital or physical assets, guides, floorplans and configuration documents