CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 171:

  For what purposes are VPNs typically used in modern WLANs?(Choose all that apply.) Response:

  A. Remote AP tunneling to a corporate WLAN controller or VPN concentrator
  B. Client device connectivity to corporate resources from unsecured public networks
  C. Initial 802.11 authentication with the AP and subsequent data encryption
  D. Tunneling APs and WLAN controllers to cloud-based management platforms
  E. Tunneling APs and WLAN controllers to RADIUS and token servers
  F. Bridging client connectivity in ad hoc networks
  A. Remote AP tunneling to a corporate WLAN controller or VPN concentrator
  B. Client device connectivity to corporate resources from unsecured public networks

• Question 172:

  What is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1- 11 are permitted?

  A. 4 (primary), +1 (secondary)
  B. 2 (primary), -1 (secondary)
  C. 8 (primary), +1 (secondary)
  D. 1 (primary), 6 (secondary)
  A. 4 (primary), +1 (secondary)

• Question 173:

  In the enterprise, when is WPA/WPA2-Personal generally a recommended solution?(Choose all that apply.) Response:

  A. When client devices do not support 802.1X/EAP
  B. When mobile device applications require high-latency roaming times between APs
  C. When client devices are provisioned in bulk and would otherwise share 802.1X credentials
  D. When the network security policy demands that each user have unique access credentials
  A. When client devices do not support 802.1X/EAP
  C. When client devices are provisioned in bulk and would otherwise share 802.1X credentials

• Question 174:

  What commonly causes a client-to-AP link imbalance?

  A. The client's antenna gain is lower than the AP's antenna gain
  B. The client's transmit power is significantly lower than the AP's transmit power
  C. The AP's transmit power is significantly lower than the client's transmit power
  D. The AP's antenna gain is lower than the client's antenna gain
  B. The client's transmit power is significantly lower than the AP's transmit power

• Question 175:

  Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room. When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you're able to see the SSID. What is the most likely cause of this problem?

  A. The AP is configured to use channel 36
  B. The customer laptop does not support Transmit Beamforming
  C. The AP is on channel 144
  D. Their laptops are SISO clients
  C. The AP is on channel 144

• Question 176:

  When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be considered and configured in all affected WLAN implementations? Response:

  A. Secure TCP
  B. Multicasting
  C. IPv6
  D. IPSec
  B. Multicasting

• Question 177:

  When performing an indoor predictive site survey to make the WLAN planning and design cycle more efficient, what is a best practice for configuration of the simulated APs in the predictive modeling software? Response:

  A. Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.
  B. If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the expected client devices, such as 25 mW.
  C. All simulated APs should be set to 20 MHz channels only.
  D. Defining custom AP and antenna patterns will yield more accurate prediction data than the pre-configured vendor AP/antenna combinations.
  B. If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the expected client devices, such as 25 mW.

• Question 178:

  When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?

  A. Frequency Selection
  B. Roaming
  C. AP vendor
  D. Band steering
  B. Roaming

• Question 179:

  During a public Wi-Fi session with 10 other users, you run a ping sweep but cannot detect any devices on your subnet. What feature is likely enabled on the WLAN infrastructure to prevent local communication between clients?

  A. Peer-to-peer blocking
  B. OSPF external routes
  C. Band steering
  D. Load balancing
  A. Peer-to-peer blocking

• Question 180:

  When implementing WLAN security according to common best practices, what feature should be enabled when configuring an EAP type?

  A. The "Use WEP if RADIUS server unavailable" option
  B. The "Validate server certificate" option
  C. The "Trusted Root Certification Authorities" list
  D. The "Do not prompt user to authorize new servers or trusted certification authorities" option
  B. The "Validate server certificate" option