CWNP CWDP-305 Online Practice Questions and Exam Preparation

CWNP CWDP-305 Online Questions & Answers

• Question 111:

  When designing for a PTP outdoor link, what important consideration should be made about local vegetation?(Choose all that apply.) Response:

  A. Leaves
  B. Tree height growth
  C. Water density
  D. Reflection factor
  A. Leaves
  B. Tree height growth

• Question 112:

  You conducted a site survey using two USB Wi-Fi adapters with a special driver designed for the site survey software. After deployment, the client devices show lower RSSI values compared to the results from your survey. What is the most likely reason for this discrepancy?

  A. USB Wi-Fi adapters designed for site surveys may have better sensitivity than regular Wi-Fi cards installed in client devices
  B. The transmit power on the APs is higher than needed
  C. Regular Wi-Fi cards installed in client devices do not support the same protocols as survey adapters
  D. All USB Wi-Fi adapters have a greater sensitivity than internal Wi-Fi adapters
  D. All USB Wi-Fi adapters have a greater sensitivity than internal Wi-Fi adapters

• Question 113:

  What are three potential benefits when an organization lets their employees bring their own device onto the company s network"?

  A. Enhanced productivity Decreased costs and Increased satisfaction
  B. Enhanced productivity Increased costs, and Decreased satisfaction
  C. Enhanced productivity. Increased costs, and Increased satisfaction
  D. increased security Enhanced productivity, and Decreased attack surface
  A. Enhanced productivity Decreased costs and Increased satisfaction

• Question 114:

  What should always be done before connecting an AP to the production network? Response:

  A. Baseline configuration that prevents the introduction of security issues to the network on initial connection.
  B. Disabling SSID broadcasting.
  C. Reduction of output power.
  D. Increase in output power.
  A. Baseline configuration that prevents the introduction of security issues to the network on initial connection.

• Question 115:

  What might limit the ability to locate 802.11 clients using a WLAN infrastructure without an 802.11 tag?(Choose all that apply.)

  A. Lack of 802.11k support
  B. When its radio is disabled
  C. When it is off
  D. RF channel selection
  B. When its radio is disabled
  C. When it is off

• Question 116:

  Which type of building material causes the most attenuation of Wi-Fi signals'?

  A. Fire-rated steel door
  B. Brick wall
  C. Drywall
  D. Plywood
  A. Fire-rated steel door

• Question 117:

  What is a radome?

  A. A type of semi-circular ceiling found in atriums and that is a heavy cause of RF reflection.
  B. A weatherproof piece of plastic covering an antenna or antenna system.
  C. The unit used to measure the signal reflected backward by the end of a cable.
  D. A piece of metal positioned behind APs mounted on outdoor poles, designed to limit the butterfly effect.
  B. A weatherproof piece of plastic covering an antenna or antenna system.

• Question 118:

  When using a WLAN design tool with propagation modeling capabilities, what critical step must be performed before adding APs, antennas, and attenuation factors like walls?

  A. Set the transmit power for all APs
  B. Add pictures of the environment
  C. Nothing; just begin by adding APs, antenna and attenuators
  D. Calibrate the floor plan to increase accuracy
  D. Calibrate the floor plan to increase accuracy

• Question 119:

  What is an advantage of centralized data forwarding?

  A. It reduces delay for user traffic
  B. It increases the encryption strength for user traffic
  C. It increases the signal strength for wireless client devices
  D. It allows for centralized filtering of wireless traffic
  D. It allows for centralized filtering of wireless traffic

• Question 120:

  An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely cause of this result? Response:

  A. The APs are still using the 5 GHz lower band
  B. The clients were not upgraded
  C. APs are mounted on the wall
  D. APs are transmitting at a low transmit power
  B. The clients were not upgraded