CWNP CWDP-304 Online Practice Questions and Exam Preparation

CWNP CWDP-304 Online Questions & Answers

• Question 81:

  What type of standards-based encryption is used by office extension APs for the traffic tunnel?(Choose all that apply.) Response:

  A. CAPWAP
  B. LWAPP
  C. TKIP
  D. AES
  E. DTLS
  A. CAPWAP
  E. DTLS

• Question 82:

  How are EAP messages transported over 802.11 wireless LANS? Response:

  A. EAP-Fast
  B. PEAP
  C. EAPOL
  D. EAP_TLS
  C. EAPOL

• Question 83:

  What is the best method of gathering attenuation measurements from any building materials or objects?

  A. After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall or object on one side and your measuring device 0.67 meters (2 feet) away from the wall or object on the other side. Take measurement and compare the difference.
  B. Use the pre-built attenuation values in the predictive design tool.
  C. After measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall or object on the other side.Take measurements and compare the difference.
  D. Look on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material provider's websites.
  A. After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall or object on one side and your measuring device 0.67 meters (2 feet) away from the wall or object on the other side. Take measurement and compare the difference.

• Question 84:

  Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?

  A. 150
  B. 62
  C. 43
  D. 22
  C. 43

• Question 85:

  What action should be taken after implementing a WLAN based on the design developed from the site survey process?

  A. Post-installation survey
  B. Requirements analysis
  C. Gathering facility documentation
  D. Design the infrastructure services
  A. Post-installation survey

• Question 86:

  While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?

  A. Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11
  B. Purchase and deploy new APs from a different vendor
  C. Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken
  D. Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result
  A. Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

• Question 87:

  Given: A WLAN controller is connected to ABC Company's core layer 3 Ethernet switch with an IEEE 802.1 Q trunk connection. The WLAN controller's native

  VLAN is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7, 8, and 9, and they each build a Layer 3 tunnel back to the WLAN controller's IP address.

  The dynamically assigned IP addresses received by each AP from a DHCP server will be ________________.

  A. Associated with the VLAN on which they are connected.
  B. Associated with the native VLAN of the WLAN controller.
  C. Associated with VLAN 1, the default VLAN for new APs
  D. Associated with a non-routable VLAN until the MAC address of the AP is removed from the controller's MAC filter
  A. Associated with the VLAN on which they are connected.

• Question 88:

  What is the purpose of a Physical Installation Guide document?

  A. To inform the Install technicians of WLAN frame exchanges and communication methods
  B. To provide clear instructions on the locations and mounting methods, and possible configuration steps for APs
  C. To provide sources for purchasing the equipment needed to implement the WLAN
  D. To prove that the WLAN meets the organization's requirements
  B. To provide clear instructions on the locations and mounting methods, and possible configuration steps for APs

• Question 89:

  What document should be created that provides instructions for install technicians to mount and configure APs?

  A. Hold Harmless
  B. Statement of Work
  C. Bill of Materials
  D. Physical installation guide
  D. Physical installation guide

• Question 90:

  You have been asked to design a WLAN for an organization. They will be replacing an existing WLAN Currently each AP operates 8 SSlDs on each radio What will you communicate with the organization so that they understand the need to reduce the number of SSlDs?

  A. implementing loo many SSIDs results in decreased data rates
  B. Implementing loo many SSIDs results in decreased throughput
  C. Implementing loo many SSIDs increases ACl in every scenario
  D. Implementing too many SSIDs reduces SNR in every scenario
  B. Implementing loo many SSIDs results in decreased throughput