IBM C9010-022 Online Practice Questions and Exam Preparation

IBM C9010-022 Online Questions & Answers

• Question 191:

  A failed disk has been replaced. The administrator wants to purge the references to the failure from the AIX error. The errors reported had an SRN of 16F35C72. How can the old errors be removed from the error log?

  A. errpt-d-j 16F35C72
  B. errclear-j 16F35C72
  C. errlogger-r-j 16F35C72
  D. errmsg-d-j 16F35C72
  B. errclear-j 16F35C72

• Question 192:

  Performance monitoring is needed for a managed system containing multiple AIX7 LPARs. Which action enables historical data capture for the managed system?

  A. Implement IBM Systems Director StandardEdition.
  B. Run snap data collections periodically.
  C. Configure the trace facility to capture details on system activity.
  D. Configure NMON to collect interval-based performance data.
  D. Configure NMON to collect interval-based performance data.

• Question 193:

  Which command will help determine if the primary Ethernet adapter in an EtherChannel has failed and the backup adapter is being used?

  A. ethstat
  B. entstat
  C. ifconfig
  D. Isagg
  B. entstat

• Question 194:

  The/app1 filesystem in appvg did not mount due to a failure replaying jfslog1. Which command will reinitialize jfslog1?

  A. resysnclvodm -vjfslog1
  B. logform/dev/jfsiog1
  C. synclvodm appvg jfslog1
  D. format-d/dev/jfslog1
  B. logform/dev/jfsiog1

• Question 195:

  What is the purpose of the virtual media repository on the VIO Server?

  A. To store resources for use by the NIM server
  B. To store backups of the VIO Server
  C. To store images for use by VIO Clients
  D. To store images for use by VIO Servers
  C. To store images for use by VIO Clients

• Question 196:

  When attempting to log into a system, the administrator receives the message "All network ports in use." How can this be resolved?

  A. Add the terminals tty0 through tty9 to the /etc/securetty file
  B. Use thenocommand to enable ipforwarding
  C. On the HMC,select the option "Reset Connection" for the server
  D. Use thechdevcommand to increase the number of pseudo-terminals
  D. Use thechdevcommand to increase the number of pseudo-terminals

• Question 197:

  An administrator is tasked with enhancing the data availability and I/O load balancing for an AIX 7.1 system attached to IBM storage.

  Which action will satisfy the requirement?

  A. Set the correct host type on the storage array and match the failover settings on the AIX instance.
  B. Adjust the health check interval attribute for each hdisk presented from the storage array.
  C. Install the appropriate path control module to work in conjunctionwith the native MPIO driver.
  D. Remove the native MPIO driver and replace with the appropriate path control module.
  B. Adjust the health check interval attribute for each hdisk presented from the storage array.

• Question 198:

  Which command will show the status of Geographically Mirrored Volume Groups?

  A. gmvgstat
  B. geovgstat
  C. Isglvm
  D. listgm
  A. gmvgstat

• Question 199:

  Which configuration will provide an LPAR maximum network resilience and performance with two Ethernet adapters?

  A. Configure both Ethernet adapters as IEEE 802.3ad link Aggregated with src_dst_port mode
  B. Configure EtherChannel using Internet Protocol over InfiniBand (IPoIB) with 64K TCP/IP MTU 64K Superpacket
  C. Configure EtherChannel with one Ethernet adapter as primary adapter and one as backup with hash mode roundrobin
  D. Configure both adapters with Quality of Server (QoS) adapters and configure virtual IP address on interfaces
  A. Configure both Ethernet adapters as IEEE 802.3ad link Aggregated with src_dst_port mode

• Question 200:

  Given the output below, what is the purpose of the ent5 and ent6 interfaces?

  

  A. Provides multiple logical networks using the IEEE 802.1 Q standard
  B. Monitors packet headers and creates the appropriate default routes
  C. Enables primary and backup EtherChannel adapter failover monitoring
  D. Allows the use of a IPv4 alias within the same subnet as the base adapter
  A. Provides multiple logical networks using the IEEE 802.1 Q standard