IBM C9010-022 Online Practice Questions and Exam Preparation

IBM C9010-022 Online Questions & Answers

• Question 1:

  An LPAR has 32 CPUs, and is reporting hundreds of page-ins and page-outs per seconD. At what level of paging should the administrator become concerned?

  A. Above the size of the paging space size in 4KB pages
  B. Above 50 pages per second
  C. Above 10 pages per CPU per second
  D. Above 10 pages per GB of allocated memory per second
  E. Above the number of paging space disks
  C. Above 10 pages per CPU per second

• Question 2:

  In order to enable an AIX host to use one virtual Ethernet adapter to communicate on multiple VLANs, what is required?

  A. The VLAN devices used by the host must be configured with IP addresses on different subnets.
  B. The virtual Ethernet adapter must be set to full duplex in AIX.
  C. VLAN devices must be configured in the AIX host.
  D. The virtual Ethernet adapter must be configured as a trunk adapter.
  C. VLAN devices must be configured in the AIX host.

• Question 3:

  Which command is used to change the reserve policy of a disk?

  A. chdev
  B. chpv
  C. chvg
  D. chattr
  A. chdev

• Question 4:

  The/usr/sbin/clcmd command is not working as documented in an administrator's reference. How can the administrator determine if the command being run is at the same level as the command being referenced in the documentation?

  A. Get the fileset name from Isipp-f, then check the level of the file set with lslpp-1.
  B. Use Islpp-wto get the fileset name, then check the level of the file set with lslpp-1.
  C. Use lslpp-1 to determine the fileset name and check the level.
  D. Use Is-I to determine the last modified date of the command.
  B. Use Islpp-wto get the fileset name, then check the level of the file set with lslpp-1.

• Question 5:

  An administrator wants to migrate data in a volume group from one set of disks to a new set of disks. No free disks are currently available within the volume group. What must be done before migrating the data to the new disks?

  A. The new disks must be added to thevolume group with extendvg and then migrate the data.
  B. The volume group must be imported to the new disks withimportvg.
  C. The volume group must be varied off withvaryoffvgbefore adding the new disks.
  D. The new disks must be formatted for a volume group withchdevand then extended.
  B. The volume group must be imported to the new disks withimportvg.

• Question 6:

  Which of the following is a requirement for a concurrent firmware update on a Power Systems server?

  A. The firmware must be upgraded to a new release.
  B. The Power Systems server must have a redundant FSP.
  C. The Power Systems server must be managed by an HMC.
  D. The primary partition must have all system resources assigned.
  C. The Power Systems server must be managed by an HMC.

• Question 7:

  An administrator has been asked to consolidate disks on an LPAR. Given the following information, which group of actions will remove unneeded disk?

  

  A. Migrate physical partitions from hdisk2 to hdisk3 Remove hdisk2 from datavg Use rmdevto permanently remove hdisk3
  B. Remove hdi sk3 from datavg Use rmdevto permanently remove hdisk3
  C. Export datavg Use rmdevto permanently remove hdisk3 re-import db2vg03
  D. Vary off datavg Use rmdevto permanently remove hdisk3 varyonvg dbvg02
  B. Remove hdi sk3 from datavg Use rmdevto permanently remove hdisk3

• Question 8:

  How can an administrator configure the storage on anAIX system, with no single points of failure in the disk storage, for a database volume group?

  A. Assign virtual storage through a VIO Server.
  B. Configure two local SAS adapters and use RAID-1.
  C. Configure a local SAS adapter and use RAID-5 with a hotspare.
  D. Configure a 2-port HBA adapter with redundant paths to SAN storage.
  B. Configure two local SAS adapters and use RAID-1.

• Question 9:

  An administrator attempts to install the fileset tivoli.tsm.client, but it fails due to missing requisites.

  The administrator copies the required filesets into the install directory and tries the preview install again. It fails with the same results, as shown in the graphic below.

  What must the administrator do to successfully install the filesets?

  

  A. Remove the .toe file or run inutoc.
  B. Provide the correct version of xlsmp.rte.
  C. Make the permissions of all of the filesets group executable
  D. Make the permissions of the requisite filesets group readable
  A. Remove the .toe file or run inutoc.

• Question 10:

  A system that will be re-installed has the following characteristics:

  

  If the following target_disk_data stanza is defined in the bosinst.data file used for the install, which disk will be installed with the operating system?

  target_disk_data:

  LOCATION = 0006bf1c3d817913

  SIZE_MB =

  HDISKNAME = hdisk1

  A. hdisk0
  B. hdisk1
  C. hdisk2
  D. hdisk3
  C. hdisk2