IBM C9010-022 Online Practice Questions and Exam Preparation

IBM C9010-022 Online Questions & Answers

• Question 131:

  Which of the following commands will display the current dump device settings?

  A. lscfg-d
  B. lsdump -d
  C. sysdump -v
  D. sysdumpdev-l
  D. sysdumpdev-l

• Question 132:

  How can an administrator use the logical volume information returned by the lslv -m command?

  A. To determine the amount of available (unused) space in the logical volume
  B. To determine which physical partitions are free for use by the logical volume
  C. To determine which physical partitions are allocated to the logical volume
  D. To determinethe current state of the logical volume
  C. To determine which physical partitions are allocated to the logical volume

• Question 133:

  Based on the following graphic, which physical adapter services fcs2?

  

  A. fcs2 on vio1
  B. fcs2 onvio2
  C. fcs6 on viol
  D. fcs6 on vio2
  C. fcs6 on viol

• Question 134:

  What speed and duplex attributes should configured on a virtual Ethernet adapter?

  A. 1000/Full
  B. Auto/Auto
  C. 10000/Full
  D. Default/Default
  C. 10000/Full

• Question 135:

  When attempting to connect to a remote system, a long delay is experienced before the login prompt is displayed. Which of the following is the most likely cause of this issue?

  A. The /etc/resolv.conf file on the remote system is missing.
  B. The /etc/resolv.conf file on the remote system has an invalid entry.
  C. The /etc/hostsfile on the remote system does not have an entry for itself.
  D. The /etc/hosts file on the remote system has an invalid hostname listed for itself.
  B. The /etc/resolv.conf file on the remote system has an invalid entry.

• Question 136:

  After recovering the rootvg from a backup, how can an administratordetermine which disks contain the DB2 volume group?

  

  A. Use the alt_disk_copy command to read the VGDA on the disk.
  B. Use the lspv command to show the logical volumes on the disk.
  C. Use the lqueryvg command to show the logical volumes on the disk.
  D. Use the lsvg command to display the volume group name on the disk
  C. Use the lqueryvg command to show the logical volumes on the disk.

• Question 137:

  Paging space on a system is almost entirely consumeD. What temporary solution can be used to prevent the system from sending SIGKILL to processes while the administrator performs more in-depth problem determination?

  A. Use swapon to flush paging space entries to physical memory.
  B. Use tuning commands to change the system behavior so it does not terminate processes
  C. Increase the existing paging space.
  D. Use tuning commands to set the page space kill threshold to 100%.
  C. Increase the existing paging space.

• Question 138:

  A host is already configured to access the network, and the administrator would like to configure a second adapter on the same system. This adapter should be permanently configured so that the new IP address is available when the system reboots. Which command should be used?

  A. ifconfig
  B. ipconfig
  C. mktcpip
  D. chdev
  D. chdev

• Question 139:

  The cfgmgr command appears to be taking an excessive time to complete. The administrator was able toquit the command and return to the command prompt. The administrator does not have access to the managing HMC and unable to check for any LED codes.

  How else can the cause of the observed delay be determined?

  A. Review the latest entry within /var/log/cfgdb.out.
  B. Start the syslog daemon before re-issuing the command.
  C. Re-issue the command with the W flag.
  D. Initiate the ledmon command from a separate session, then re-issue cfgmgr.
  C. Re-issue the command with the W flag.

• Question 140:

  A company has numerous LPARs hosting database servers, and three versions of the DBMS deployed in the environment. A critical APAR fixes data corruption for one version of the database, but it requires a server reboot. The only inventory information available is a spreadsheet with every LPAR's hostname and root password.

  Which sequence of tasks will determine which servers are missing the critical APAR, and only apply it to the servers running the affected level of the database?

  A. Use the spreadsheet to populate the /etc/hosts file on the management node. Configure a NIM server that has the APAR in an lpp_source. Force-register all of the LPARs with the NIM server. Use NIM group operations to install the APAR and boot at a scheduledtime.
  B. Use the spreadsheet to create a dsh node list. Use dsh with Islpp to create a node list for LPARs needing the APAR. Use dcp and dsh to install the APAR and reboot.
  C. Configure a Systems Director server using the spreadsheet import function. Use the inventory function to discover the database level and APAR status. Use the Update Manager to apply the APAR to the affected LPARs and reboot.
  D. Use the spreadsheet to create a dsh node list. Use dcp and dsh to install the APAR. Use dsh to reboot the systems.
  B. Use the spreadsheet to create a dsh node list. Use dsh with Islpp to create a node list for LPARs needing the APAR. Use dcp and dsh to install the APAR and reboot.