IBM C4040-129 Online Practice Questions and Exam Preparation

IBM C4040-129 Online Questions & Answers

• Question 41:

  An administrator is connecting to the HMC for IBM i console access using IBM i Access Using port 2300. What is the required user ID in "Connection Properties"?

  A. Q#HMC
  B. hscroot
  C. QSECOFR
  D. QCONSOLE
  A. Q#HMC

• Question 42:

  What is required of all user profiles that use objects in an independent ASP?

  A. Users must have authority to the ASP device description.
  B. Users must be a member of the group profile that owns the ASP.
  C. The ASP group name must be specified in the initial library list.
  D. The users need to be part of the QASPGRP authorization list to allow access.
  A. Users must have authority to the ASP device description.

• Question 43:

  A customer with in-house developed applications has many custom commands in library APPLIB that relate to the application programs. As part of a system audit, the administrator needs to run a report to determine which user profiles have authority to run the commands. Given the application library APPLIB, which report from the Security Tools menu should the administrator use to complete this task?

  A. Option 21 - Adopting Objects
  B. Option 40 - Program Authority
  C. Option 49- User Profile Authority
  D. Option 25- Command Private Authority
  D. Option 25- Command Private Authority

• Question 44:

  An administrator needs to move a system from security level 30 to 40 and ensure that risk is reduced as much as possible. How should the administrator configure system security journaling to support the security level change?

  A. CHGSYSVAL QAUDCTL to *AUDLVLCHGSYSVAL QAUDLVL *AUTFAILMonitor QAUDJPN for failures.
  B. CHGSYSVAL QAUDSYS to *OPSYSCHGSYSVAL QAUDLVL *INTEGRITYMonitor QAUDJRN for System Integrity violations.
  C. CHGSYSVAL QAUDCTL to *AUDLVLCHGSYSVAL QAUDLVL *VIOLATIONSCHGOBJAUD OBJ (*All PALL) OBJTYPE(*PGM) OBJAUD(*All)Monitor QAUDJPN for security violations.
  D. CHGSYSVAL QAUDSYS to *OPSYSCHGSYSVAL QAUDLVL *PGMVIOCHGOBJAUD QBJ(*All PALL) QBJTYPE(*PGM) OBJAUD(*All)Monitor QAUDJPN for System Program and MI violations.
  A. CHGSYSVAL QAUDCTL to *AUDLVLCHGSYSVAL QAUDLVL *AUTFAILMonitor QAUDJPN for failures.

• Question 45:

  A customer is installing a new POWER7 server with IBM i as the host partition for three additional IBM i partitions. The server has just one 4 port Ethernet card.

  The administrator needs to achieve IP connectively for all four partitions.

  What should the administrator do?

  A. Purchase additional Ethernet cards for the client partitions.
  B. Connect each partition to one of the ports on the 4 port Ethernet card.
  C. On the hosting partition, create a bridge using one of the ports of the Ethernet card to a virtual Ethernet network. Connect each of the client partitions to the virtual Ethernet network.
  D. Connect each partition to a virtual network.Configure IP on each client partition to use the host partition as an IP gateway.Add routes to the corporate router pointing to the host partition as the gateway to the client partitions.
  C. On the hosting partition, create a bridge using one of the ports of the Ethernet card to a virtual Ethernet network. Connect each of the client partitions to the virtual Ethernet network.

• Question 46:

  Programmers working on a software development project frequently need to save their development library (LIBX) at the prior release level of the operating system.

  The administrator needs to change the default value of the SAVLIB command parameter to accommodate the programmers" prior release save requirement.

  The default value before the change was: SAVLIB LIB(LIBX) TGTRLS(*CURRENT) The default value after the change will be: SAVLIB LIB(LIBX) TGTRLS(*PRV)

  What should the administrator do to facilitate the change?

  A. Adjust the system value QFRCCVNRST (Force conversion on restore) to *PRV.
  B. Use the Change Command Default (CHGCMDDFT) command to change the TGTRLS parameter value to *PRV.
  C. Use the Save Restore Configuration (SAVRSTCFG) command to change the TGTRLS parameter value to *PRV.
  D. Use the command WRKREGINF to modify the exit point program QIBM_SAV_SECURITY and change the TGTRLS parameter value to *PRV.
  B. Use the Change Command Default (CHGCMDDFT) command to change the TGTRLS parameter value to *PRV.

• Question 47:

  A customer has a database that is fully journaled, including remote journals. The overnight backup of the data, including access paths, completed normally.

  The system failed and the customer needs to recover on the remote journal system.

  After restoring the nightly save to the remote system, what must the administrator do to make the database usable on the remote system?

  A. Apply journal changes from the remote copy of the journal receivers to the restored data.
  B. Apply journal changes from the remote copy of the journal receivers to the restored data. EDTRBDAP to monitor the rebuild of the access paths.
  C. Restore the saved journals to the remote system.Apply journal changes from the remote copy of the journal receivers to the restored data. EDTRBDAP to monitor the rebuild of the access paths.
  D. Restore the saved journals to the remote system.Associate the remote receivers to the restored journals.Apply journal changes from the remote copy of the journal receivers to the restored data.
  A. Apply journal changes from the remote copy of the journal receivers to the restored data.

• Question 48:

  Which command is used to turn off the front panel attention light for an IBM i partition?

  A. WRKPRB (Work Problem)
  B. STRSST (Start System Service Tools)
  C. RSTATNIND (Reset Attention Indicator)
  D. DSPMSG QSYSOPR (Display Messages on QSYSOPR message queue)
  B. STRSST (Start System Service Tools)

• Question 49:

  An administrator has been asked to update an IBM i 7.1 system to the most current Technology Refresh available from IBM. Which method is the most appropriate to achieve the update?

  A. Perform a D-mode IPL using the Technology Group PTF package SF99707.
  B. Perform a slip install using the most current 1_Base_01 resave media available.
  C. Perform a scratch install using the most current 1_Base_01 resave media available.
  D. Perform an install of the Technology Group PTF package SF99707 using the GO PTF menu.
  D. Perform an install of the Technology Group PTF package SF99707 using the GO PTF menu.

• Question 50:

  A custom application program is submitted daily by operations personnel using the CALL command. The program has a requirement that the prior days backup tape volume serial be passed via a parameter so the program can read the tape. The program has failed due to syntax errors when entering the CALL command and parameters.

  What can the administrator do to help minimize similar errors?

  A. Use the Check Tape command and set the Exit parameter to call the program.
  B. Create a Job Schedule Entry to call the program and prompt for the parameter.
  C. Use the command SBMJOB to call the program and set the OTAPE data area parameter to *LAST.
  D. Develop a CL program to capture the correct parameter value. call the program, and pass the parameter.
  D. Develop a CL program to capture the correct parameter value. call the program, and pass the parameter.