IBM C4040-109 Online Practice Questions and Exam Preparation

IBM C4040-109 Online Questions & Answers

• Question 101:

  An architect is desiging a new virtualized POWER7 system. The system will have a number of AIX and Linux LPARs and will be deployed with a logical memory block size of 16MB.Which of the following could be used to determine the amount of memory used by the Hypervisor?

  A. System Planning Tool.
  B. System Configurator.
  C. Facts and Features Guide.
  D. LPAR Validation Tool.
  A. System Planning Tool.

• Question 102:

  A company has purchased a Power 770 server and will be implementing a virtual environment for transaction processing. What method can be used to configure the new system to easily allow for an identical environment at a disaster recovery site?

  A. Record the profile information for each partition.
  B. Perform remote VIO server backups to the disaster recovery site.
  C. Maintain the primary and recovery site with IBM Systems Director.
  D. Deploy a sysplan that was created by the System Planning Tool.
  D. Deploy a sysplan that was created by the System Planning Tool.

• Question 103:

  An architect is planning to use an existing NIM server to back up and restore VIO server partitions. In addition to the backup of the VIO Server (VIOS), what is needed to successfully complete a restore operation?

  A. A backup of the profile data from the VIOS partition.
  B. A valid LPP Source on the NIM partition and an extracted SPOT from the VIOS backup.
  C. A copy of the volume group structures and a list of device mappings from the VIOS partition.
  D. A copy of the VIOS bosinst. data from the VIOS partition.
  C. A copy of the volume group structures and a list of device mappings from the VIOS partition.

• Question 104:

  An administrator has an existing NIM server running AIX 5.3 TL9. They would like to use this NIM server to upgrade an existing VIO server (VIOS) partition from version 1.5 to version 2.2 FP24.

  A. Upgrade the VIOS LPAR to Fix Pack 12.
  B. Commit all applied e-fix packages in the VIOS partition.
  C. UpgradetheNIMservertoAIX6.1TL6.
  D. Ensure that Virtual I/O Tools have been installed on the NIM server.
  C. UpgradetheNIMservertoAIX6.1TL6.

• Question 105:

  An administrator would like to determine the virtualization capabilities of some attached storage before proposing a new virtualization strategy. To determine the capabilities of the attached storage, the administrator runs chkdev and receives the following result: padmin:vio1:/home/padmin>chkdev -dev hdisk1 NAME: hdisk1

  IDENTIFIER: 382136005076801710072480000000000791F04214503IBMfcp PHYS2VIRT_CAPABLE: NA VIRT2NPIV_CAPABLE: YES

  VIRT2PHYS_CAPABLE: YES

  Based on the output above, which one of the statements is true?

  A. The disk can be presented by NPIV only.
  B. The disk can be converted to NPIV with data loss.
  C. The disk can only be presented as a physical disk.
  D. The disk is presented by vSCSI and is NPIV capable.
  D. The disk is presented by vSCSI and is NPIV capable.

• Question 106:

  A customer will be ordering a number of small POWER7 machines which require that PCIe cards be placed in a particular configuration. These will be shipped to small customer branches where technical resource is limited. Which feature will direct IBM manufacturing to place PCIe cards as required?

  A. Customer Specified Placement (CSP)
  B. Customer Certified Installation (CCI)
  C. Approved Hardware Configuration (AHC)
  D. Build to Order (BtO)
  A. Customer Specified Placement (CSP)

• Question 107:

  A company wants to migrate an existing x86 Linux CRM and database environment from a large cluster of servers to a Power 750 server. How can they perform this with minimal costs and rapid deployment?

  A. Create virtual LPARs with Linux and migrate the applications, porting the x86 applications to Power.
  B. Create virtual LPARs with Linux and migrate the applications to IBM Middleware for Linux.
  C. Create virtual LPARs with Linux and install the applications using PowerVM Lx86.
  D. Create virtual LPARs with Linux and install the applications using VMware.
  C. Create virtual LPARs with Linux and install the applications using PowerVM Lx86.

• Question 108:

  During the validation of a planned partition migration between managed servers, the following error message is displayed:HSCLA297 The DLPAR Resource Manager (DRM) capability bits 0x0 for mover service partition (MSP) VIOS indicate that partition mobility functions are not supported on the partition. What is the most likely cause of this error?

  A. An RMC error has occurred on one of the VIOS partitions.
  B. The mobile partition has an HEA logical port configured.
  C. There is a mismatch in VIO Server versions between the two systems.
  D. The network connection to the mobile partition is not working.
  A. An RMC error has occurred on one of the VIOS partitions.

• Question 109:

  An administrator is designing a new system for their existing batch environment. The current system is a POWER5 570 with 16 cores and 128GB of RAM with a single LPAR running AIX 5.3. It takes 12 hours to run their large batch job which is heavily CPU bound on 4 the available CPUs. The new system will be a Power 770 with 16 cores, 128GB of RAM and the LPAR will run AIX 6.1.What should be done to maximize the batch performance?

  A. Activate TurboCore mode during batch processing
  B. Disable Simultaneous Multi-threading
  C. Disable Multiple Shared Processor Pools
  D. Set the processor compatibility mode to POWER7
  B. Disable Simultaneous Multi-threading

• Question 110:

  An administrator has defined a new virtual SCSI server device, vhost0, to support a client LPAR on a new system. A disk, hdisk2, has been presented from a SAN to the VIO server. The administrator attempts to map the disk on the VIO server using the following command. mkvdev - vadapter vhost0 -dev hdisk2 -vdev client_rootvgThe error 'client_rootvg" is not a valid backing device' was received. Which of the following explains the error?

  A. The disk is already allocated to another VIO server
  B. The virtual target device "client_rootvg" is already in use.
  C. The disk is formatted at 522 bytes/block.
  D. The -dev and -vdev flags have the incorrect parameters.
  D. The -dev and -vdev flags have the incorrect parameters.