IBM C2090-560 Online Practice Questions and Exam Preparation

IBM C2090-560 Online Questions & Answers

• Question 21:

  A Windows software package has several prerequisites for installation. Some client systems have the package and some do not. What is the best method for ensuring a successful software roll out to all agent systems?

  A. Create a multiple action group to reinstall the prerequisites and then install the package.
  B. Create a task for each package and use scheduling to install the prerequisites before the package.
  C. Create a baseline consisting of one component for each prerequisite and one component for the software package.
  D. Use the Windows Software Distribution Wizard to create a multiple action group consisting of each prerequisite and the software package.
  C. Create a baseline consisting of one component for each prerequisite and one component for the software package.

• Question 22:

  Why would the SHA1 of an action downloaded on the agent need to be checked?

  A. to troubleshoot why an action failed to be run by an agent
  B. to troubleshoot why the agent service has stopped running
  C. to troubleshoot if the pre-cache setting was successfully turned on
  D. to troubleshoot whether FIPS mode was turned on during the deployment
  A. to troubleshoot why an action failed to be run by an agent

• Question 23:

  What is the best way to verify if an IBM Tivoli Endpoint Manager (TEM) Server connects to the Internet through a proxy?

  A. use the TEM Server diagnostic tool
  B. use a packet sniffing tool to analyze the network traffic
  C. deploy the Check Internet Connection Fixlet on the server
  D. open a Web browser and confirm access to www.ibm.com
  A. use the TEM Server diagnostic tool

• Question 24:

  An IBM Tivoli Endpoint Manager (TEM) Console operator has been assigned management rights on a computer that is powered off. Is the computer visible in the operator console?

  A. Yes, if Wake on LAN has been enabled.
  B. Yes, the processing is done at the server level.
  C. No, it will only be visible when the Show Computer Fixlet is deployed.
  D. No, it will only be visible once the computer is powered on and the BES Client is started.
  D. No, it will only be visible once the computer is powered on and the BES Client is started.

• Question 25:

  What is the minimum recommended hardware for the IBM Tivoli Endpoint Manager Server given an implementation of approximately 10,000 computers?

  A. 2-3 GHz - 2 Cores, 4 GB RAM, 1 RAID
  B. 2-3 GHz , 2 GB RAM, standard hard drives
  C. 2-3 GHz - 2-4 Cores, 8 GB RAM, 1-2 RAID 10
  D. 2-3 GHz - 4-8 Cores, 16-32 GB RAM, 2 RAID 10
  C. 2-3 GHz - 2-4 Cores, 8 GB RAM, 1-2 RAID 10

• Question 26:

  What function does the setting BESRelay_Register_Affliation_AdvertisementList perform?

  A. It provides relays and servers the group they affiliate with.
  B. It provides a relay with the list of agents it is allowed to affiliate with.
  C. It provides agents, relays, and servers the list of relays to affiliate with.
  D. It provides agents with the location on the server that stores the advertisement list.
  A. It provides relays and servers the group they affiliate with.

• Question 27:

  A console operator must preconfigure the installation of IBM Tivoli Endpoint Manager (TEM) Agents on endpoints. What is the name of the configuration file used?

  A. temconfig.sys
  B. temsettings.cfg
  C. clientsettings.cfg
  D. unattendedinstall.cfg
  C. clientsettings.cfg

• Question 28:

  Which three components can be installed with the IBM Tivoli Endpoint Manager (TEM) Installation Guide (Component Installer)? (Choose three.)

  A. TEM Relay
  B. TEM Server
  C. TEM Console
  D. TEM Agents for UNIX
  E. TEM Agents for Windows
  F. TEM for Software Usage Analysis
  B. TEM Server
  C. TEM Console
  E. TEM Agents for Windows

• Question 29:

  What is the primary rationale for placing an IBM Tivoli Endpoint Manager (TEM) Relay at a location?

  A. It is based solely on the bandwidth of the connecting WAN. A slow WAN requires the use of a TEM Relay to support the remote TEM Agents.
  B. It is based solely on the geographical location of the remote TEM Agents. The farther from the TEM Server, the more critical it is to place a TEM Relay.
  C. It is based on the bandwidth and saturation of the connecting WAN along with the proximity of the proposed TEM Relay to a large number of TEM Agents.
  D. It is based on the availability of a supported operating system and the availability of the potential TEM Relay system to be available 24 hours a day, seven days a week.
  C. It is based on the bandwidth and saturation of the connecting WAN along with the proximity of the proposed TEM Relay to a large number of TEM Agents.

• Question 30:

  What is the most common cause of IBM Tivoli Endpoint Manager Web Reports not showing data?

  A. The Web Reports server cannot reach any relays.
  B. The Web Reports database logs did not rotate properly.
  C. The Web Reports user is not using a supported browser.
  D. The Web Reports database has been disabled due to timeout being reached.
  D. The Web Reports database has been disabled due to timeout being reached.