IBM C1000-031 Online Practice Questions and Exam Preparation

IBM C1000-031 Online Questions & Answers

• Question 21:

  A customer is using PowerVM to virtualize a Power Systems server.

  Which software product will allow them to provision the entire hardware stack (host, storage and network)?

  A. PowerVC
  B. PowerVP
  C. PowerKVM
  D. PowerSC
  C. PowerKVM

• Question 22:

  A customer would like to deploy a new application that requires 7 day by 24 hour availability.

  What advantage does the Power System E980 have versus the Power System S924 to satisfy their requirement?

  A. PCIe hot plug adapters
  B. Soft error protection, recovery and self-healing
  C. Active Memory Mirroring
  D. Chipkill memory
  C. Active Memory Mirroring

  ---

  Reference: https://www-01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_ca/6/877/ENUSZG18-0086/index.htmlandrequest_locale=en

• Question 23:

  A customer has a 40 core Power System E980 and would like to use Mobile Capacity on Demand. What is the minimum of static processor activations that are required?

  A. 10
  B. 12
  C. 20
  D. 8
  D. 8

  ---

  Reference: https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?htmlfid=899/ENUSLG18-0083andinfotype=ANandsubtype=CA

• Question 24:

  A customer wants to configure a Power System E950 with:

  36 physical processor cores

  24 active processor cores

  A partition running AIX with 8 virtual processors and 4.0 processor entitlement.

  A partition running AIX with 12 virtual processors and 7.2 processor entitlement.

  A partition running Linux with 8 virtual processors and 6.4 processor entitlement.

  2 partitions running VIOS, each with 4 virtual processors and 2.0 processor entitlement.

  All partitions are uncapped.

  All processors are in the default pool. No additional Shared Processor Pools are used.

  How many AIX licenses are required?

  A. 24
  B. 12
  C. 20
  D. 36
  B. 12

• Question 25:

  Which of the following needs to be taken into consideration when designing an IBM Power System E980 solution?

  A. Each system node has eight PCI full-size Gen3 slots which are a mix of x8 and x16 PCIe slots.
  B. A DVD drive must be included in either the system control unit or in a system node.
  C. Redundant SAS controllers in each system node manage all six system node SAS bays.
  D. Only low profile PCIe adapters are supported in the system node.
  A. Each system node has eight PCI full-size Gen3 slots which are a mix of x8 and x16 PCIe slots.

  ---

  Reference: https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=ANandsubtype=CAandhtmlfid=877/ENUSZG18-0086andappname=lenovospainandlanguage=es

• Question 26:

  Which of the following is true for systems virtualized with PowerVM?

  A. Adapters can be dedicated to LPARs.
  B. LPARs require virtual adapters.
  C. LPARs require shared memory.
  D. Cores must be shared between LPARs.
  A. Adapters can be dedicated to LPARs.

• Question 27:

  A customer has older generations of Power System servers that they want to manage with their Power System E980 server from the same HMC running V9R1.910.

  What is the oldest Power Systems generation that is supported with this HMC level?

  A. POWER6
  B. POWER7
  C. POWER7+
  D. POWER8
  A. POWER6

• Question 28:

  A customer would like to have the ability to move cores and memory activations between servers inside a pool.

  What kind of activation must be considered?

  A. Trial capacity on demand
  B. Mobile activation
  C. Elastic capacity on demand
  D. Static activation
  C. Elastic capacity on demand

• Question 29:

  A customer has used Trial Capacity on Demand on their Power System E980 for two months to test the effect of activating two additional cores and 32GB of additional memory for their SAP LPAR. Being satisfied with the test result, they bought a permanent activation of two cores and 32GB memory.

  They now want to do another short test that requires the activation of one additional core.

  Which option provides the most cost-effective solution?

  A. Use Static Activation.
  B. Use Utility Capacity on Demand.
  C. Use Trial Capacity on Demand again.
  D. Use Mobile Activation.
  B. Use Utility Capacity on Demand.

• Question 30:

  A customer wants the highest performance drives possible for booting the VIOS on their Power System E980. The solution must allow for concurrent maintenance of the drives.

  Which of the following technology solutions will best satisfy their requirement?

  A. SAS attached SSD
  B. Fibre Channel attached SSD
  C. Internal NVMe
  D. Internal HDD on a split backplane
  B. Fibre Channel attached SSD