BICSI BICSI-RCDD Online Practice Questions and Exam Preparation

BICSI BICSI-RCDD Online Questions & Answers

• Question 311:

  What is a passive optical network (PON)?

  A. A point-to-multipoint network architecture in which unpowered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  B. A point-to-point network architecture in which powered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  C. A point-to-point network architecture in which unpowered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  D. A point-to-multipoint network architecture in which powered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.
  A. A point-to-multipoint network architecture in which unpowered optical splitters are used to enable a single optical fiber strand to serve multiple end-points.

• Question 312:

  The above performance report shows the earned value (EV) analysis for a program.

  The program director performs a high-level analysis and must present a summary narrative to the steering committee

  

  What do the current findings show?

  A. Project C is running behind schedule and is over budget, projects A, B and D are on schedule
  B. Project A is running ahead of schedule and is under budget projects B, C and D are behind schedule
  C. and D are on schedule
  D. Project A is running behind schedule and is over budget projects B,
  D. Project A is running behind schedule and is over budget projects B,

• Question 313:

  What is the permitted substitutes for a fiber optic cable rated OFNP?

  A. OFNG
  B. None
  C. OFCP
  D. OFNR
  B. None

• Question 314:

  Which one of the following would meet the minimum horizontal cabling support for an individual work area location?

  A. One Category 3 copper cable and one (2 fiber) 50/125 micron fiber.
  B. Two Category 3 copper cables.
  C. One Category 3 and one Category 5e copper cables.
  D. Two Category 5e copper cables.
  E. One Category 5e copper cable and one (2-fiber) 62.5/125 micron multimode fiber.
  F. Two (2-fiber) 62.5 micron multimode fiber.
  A. One Category 3 copper cable and one (2 fiber) 50/125 micron fiber.
  B. Two Category 3 copper cables.
  C. One Category 3 and one Category 5e copper cables.
  D. Two Category 5e copper cables.
  E. One Category 5e copper cable and one (2-fiber) 62.5/125 micron multimode fiber.

• Question 315:

  Conducted coupling may affect electronic devices primarily through

  which two of the following means'?

  (Select two options.)

  A. inductive coupling (by magnetic fields)
  B. Input signal lines
  C. Output signal lines
  D. Optical signal lines
  E. Capacitive coupling (by electric fields)
  B. Input signal lines
  C. Output signal lines

• Question 316:

  A large automaker begins a program to create the next-generation car.

  As the program team is composed, key stakeholders are identified Key stakeholders for the program should include which of the following?

  A. Potential customers, government regulatory agencies, and competitors
  B. Project management office (PMO), third-party contractors, and agents
  C. Local car dealers, factory workers, and corporate officers
  D. Vice president of logistics, potential customers, and corporate executives
  A. Potential customers, government regulatory agencies, and competitors

• Question 317:

  What is the MINIMUM lighting requirement (or telecommunications spaces?

  A. 50 lux (4.6 toot-candles) of lighting in the horizontal plane and 20 lux (1.9 fool-candles) of lighting in the vertical plane measured al at 1 meter (3.28 feet) above the finished floor
  B. 200 lux (18 6 fool-candles) of lighting In the horizontal plane and 500 lux (46 foot-candles) of lighting In the vertical plane measured at at 1 meter (3.28 feet) above the finished floor
  C. 500 lux (46 foot-candles) of lighting in the horizontal plane and 200 lux (18 6 foot-candles) of lighting in the vertical plane measured at at 1 meter (3 28 feet) above the finished floor
  D. 500 lux (46 foot-candles) of lighting in the horizontal plane and 500 lux (46 foot-candles) of lighting in the vertical plane measured at at 1 meter (3 28 feet) above the finished floor
  C. 500 lux (46 foot-candles) of lighting in the horizontal plane and 200 lux (18 6 foot-candles) of lighting in the vertical plane measured at at 1 meter (3 28 feet) above the finished floor

• Question 318:

  Power outlets should be place every 10 feet around the perimeter walls of the TR.

  A. True
  B. False
  B. False

• Question 319:

  A program to implement a new payroll processing system at a healthcare company is nearing completion and is under budget.

  What should the program manager do next?

  A. Request permission from the program governance board to initiate program closure activities
  B. Present additional opportunities to the program sponsor
  C. Apply the remaining budget to operational activities
  D. Apply the remaining budget to deferred enhancement requests
  A. Request permission from the program governance board to initiate program closure activities

• Question 320:

  The color brown, of the cross-connect field color code, identifies

  which of the following?

  A. Network connections.
  B. First-level backbone.
  C. Interbuilding backbone
  D. First-level backbone.
  C. Interbuilding backbone