Microsoft AZ-801 Online Practice Questions and Exam Preparation

Microsoft AZ-801 Online Questions & Answers

• Question 241:

  HOTSPOT

  You have an Azure subscription that contains two virtual machines named VM1 and VM2. VM1 runs Windows Server. VM2 runs Ubuntu Linux.

  You need to monitor VM1 and VM2 by using VM insights. The solution must meet the following requirements:

  Ensure that you can monitor the memory usage on VM1.

  Ensure that you run the Map feature on VM2.

  The solution must minimize the number of agents required for each virtual machine.

  Which agents are required on each virtual machine? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  Box 1: The Azure Monitor agent only Ensure that you can monitor the memory usage on VM1.

  VM1 runs Windows Server.

  VM guest data VM guest data lets you analyze and troubleshoot the performance and operational efficiency of workloads running on your VMs. To monitor VM guest data, you need to install Azure Monitor Agent on the VM and set up a data collection rule (DCR). The VM Insights feature automatically installs Azure Monitor Agent on your VM and sets up a default data collection rule for quick and easy onboarding.

  Box 2: The Azure Monitor agent only?

  Ensure that you run the Map feature on VM2.

  VM2 runs Ubuntu Linux.

  Azure Monitor, Use the Map feature of VM insights to understand application components In VM insights, you can view discovered application components on Windows and Linux virtual machines (VMs) that run in Azure or your environment.

  You can observe the VMs in two ways. You can view a map directly from a VM. You can also view a map from Azure Monitor to see the components across groups of VMs.

  Prerequisites

  To enable the Map feature in VM insights, the virtual machine requires one of the following agents:

  Azure Monitor Agent with processes and dependencies enabled.

  The Log Analytics agent enabled for VM insights.

  Important

  The legacy Log Analytics agent is deprecated as of August 31, 2024. Microsoft will no longer provide any support for the Log Analytics agent. If you use the Log Analytics agent to ingest data to Azure Monitor, migrate now to Azure Monitor agent.

  Incorrect:

  Azure Connected Machine agent

  The Azure Connected Machine agent enables you to manage your Windows and Linux machines hosted outside of Azure on your corporate network or other cloud providers.

  Dependency agent

  Dependency Agent collects data about processes running on the virtual machine and their external process dependencies. Updates include bug fixes or support of new features or functionality.

  Note

  Dependency Agent sends heartbeat data to the InsightsMetrics table, for which you incur data ingestion charges. This behavior is different from Azure Monitor Agent, which sends agent health data to the Heartbeat table that is free from data collection charges.

  Azure Linux VM Agent

  The Microsoft Azure Linux VM Agent (waagent) manages Linux and FreeBSD provisioning, along with virtual machine (VM) interaction with the Azure fabric controller. In addition to the Linux agent providing provisioning functionality, Azure provides the option of using cloud-init for some Linux operating systems.

  References:

  https://learn.microsoft.com/en-us/azure/virtual-machines/monitor-vm

  https://learn.microsoft.com/en-us/azure/azure-monitor/vm/vminsights-dependency-agent

• Question 242:

  You have an on-premises server that runs Windows Server and has the Web Server (IIS) server role installed. The server hosts a web app that connects to an on-premises Microsoft SQL Server database.

  You plan to migrate the web app to an Azure App Services web app. The database will remain on-premises.

  You need to ensure that the migrated web app can access the database.

  What should you configure in Azure?

  A. an Azure SQL managed instance
  B. an on-premises data gateway
  C. Azure Extended Network
  D. a Hybrid Connection
  D. a Hybrid Connection

  ---

  Explanation

  References:

  https://docs.microsoft.com/en-us/azure/app-service/app-service-hybrid-connections

• Question 243:

  Which domain controller should be online to meet the technical requirements for DC4?

  A. DC1
  B. DC2
  C. DC3
  A. DC1

• Question 244:

  DRAG DROP

  You have two Azure virtual machines named VM1 and VM2. VM1 is backed up to an Azure Recovery Services vault daily and retains backups for 30 days.

  You need to restore an individual file named C:\Data\Important.docx from VM1 to VM2. The solution must minimize administrative effort.

  Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 245:

  You are planning the migration of Archive1 to support the on-premises migration plan.

  What is the minimum number of IP addresses required for the node and cluster roles on Cluster3?

  A. 2
  B. 3
  C. 4
  D. 5
  B. 3

  ---

  Explanation

  One IP for each of the two nodes in the cluster and one IP for the cluster virtual IP (VIP).

• Question 246:

  HOTSPOT

  You have three Hyper-V hosts named Server1, Server2, and Server3 that run Windows Server, Server1 hosts a virtual machine named VM1.

  You enable Hyper-V Replica to replicate VM1 to Server2 and set the replication frequency to 30 seconds.

  You need to extend the replication and create a second replica of VM1.

  On which Hyper-V hosts should you configure the replication, and what is the minimum replication frequency you can use? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 247:

  You have an Azure subscription. The subscription contains virtual machines that run Windows Server as shown in the following table.

  

  You plan to implement Azure Site Recovery.

  Which virtal machines can be replicated by using Site uRecovery?

  A. VM1 only
  B. VM1 and VM2 only
  C. VM1, VM2, and VM3 onlyV
  D. VM1, VM2, and VM4 only
  E. VM1, VM2, VM3, and VM4
  C. VM1, VM2, and VM3 onlyV

  ---

  Explanation

  [Not VM4]

  Confidential VMs don't support:

  Azure Backup

  Azure Site Recovery

  Etc.

  [VM3]

  For Trusted Launch VMs Boot Integrity Monitoring: Replication of the boot integrity monitoring state isn't supported. If you want to use it, enable it explicitly on the failed-over virtual machine.

  It can be replicated, but you need to manually re-enable it again.

  Note:

  Azure Site Recovery fully supports replication, failover, and failback for both Windows and Linux Trusted Launch VMs under specific conditions.

  This means you can now enjoy the benefits of advanced security features without sacrificing disaster recovery capabilities.

  Supported Scenarios and Requirements [VM2]

  Supported VM Types

  Windows Trusted Launch VMs

  Fully supported across all Azure regions where ASR is available.

  Works with Secure Boot and vTPM enabled.

  Compatible with shared disk configurations and private endpoint vaults.

  Limitations and Known Issues

  Boot Integrity Monitoring

  Must be re-enabled post-failover [VM3 ?requires manual re-enabling of this feature].

  Etc.

  References:

  https://learn.microsoft.com/en-us/azure/confidential-computing/confidential-vm-overview

• Question 248:

  HOTSPOT

  You have a server named Server1 that runs Windows Server.

  On Server1, you create a Data Collector Set named CollectorSet1 based on the Basic template.

  You need to configure CollectorSet1 to meet the following requirements:

  1. Older performance counter logs must be overwritten by new ones.

  2. Performance counter logging must stop if there is less than 500 MB of free disk space.

  What should you configure for each requirement? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 249:

  You have a failover cluster named Cluster1 that contains two Windows Server nodes named Server1 and Server2. Cluster1 hosts highly available Hyper-V virtual machines.

  You have a member server named Server3 that runs Windows Server.

  You need to implement Cluster-Aware Updating (CUA) on Cluster1 and configure Server3 to manage CUA. The solution must minimize administrative effort.

  What should you install on Server3?

  A. the Host Guardian Service server role
  B. Windows Admin Center
  C. the Failover Cluster Automation Server feature
  D. the Windows Server Update Services server role
  D. the Windows Server Update Services server role

  ---

  Explanation

  To manage Hyper-V failover cluster updates, you can install the Windows Server Update Services (WSUS) server role on a server and configure Cluster-Aware Updating (CAU) to use it as a management point. You will first need to install the Failover Clustering feature and its tools, then install the WSUS server role, and finally configure CAU in its self-updating mode to coordinate the process of patching the cluster nodes and Hyper-V virtual machines with minimal downtime.

  References:

  https://learn.microsoft.com/en-us/windows-server/failover-clustering/cluster-aware-updating

• Question 250:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.

  Sysvol replicates by using the File Replication Service (FRS).

  You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022.

  You need to ensure that you can add the first domain controller that runs Windows Server 2022.

  Solution: You upgrade the PDC emulator.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Explanation

  Instead migrate sysvol from FRS to Distributed File System (DFS) Replication.

  Note: Do I need to change SYSVOL replication from FRS to DFS? If your domain is built based on Windows server 2008 or Windows Server 2008 R2, you are already using DFS for SYSVOL replication. If you originally migrated from Windows server 2003, it's more likely you are still using FRS. In that case, before migration, you need to change the SYSVOL replication method from FRS to DFS.

  References:

  https://www.rebeladmin.com/2021/09/step-by-step-guide-active-directory-migration-from-windows-server-2008-r2-to-windows-server-2022/