ASVAB ASVAB-SECTION-4 Online Practice Questions and Exam Preparation

ASVAB ASVAB-SECTION-4 Online Questions & Answers

• Question 161:

  Joe loves to go on wild nature adventures. He always brings his four-wheel drive truck.

  In difficult terrain such as deep snow or loose sand, why would Joe's truck do better than a 2-wheel drive SUV?

  A. It is capable of running faster on straight, dry pavements.
  B. It can carry much heavier loads.
  C. More driven wheels increase the likelihood of gaining traction.
  D. The drive shaft extends from the transmission to the front axle.
  C. More driven wheels increase the likelihood of gaining traction.

• Question 162:

  Which would be the last woodworking plane that you would use to prepare a rough sawn board for finishing?

  A. Jointer plane
  B. Scrub plane
  C. Jack plane
  D. Smoothing plane
  D. Smoothing plane

• Question 163:

  In arc welding, TIG stands for __________.

  A. Turner Insertion Gas
  B. Tungsten Inert Gas
  C. Torch Inert Gasification
  D. Tin Impressible Galvanisation
  B. Tungsten Inert Gas

• Question 164:

  If a driver inserts the key to start his car and finds that it does not work, then there is a problem with the ignition system. Seeing that the car has a full tank of gas, the next logical thing to do is __________.

  A. replace the gas in the gas tank immediately
  B. call a tow truck since there is no possible way of moving the car at that point
  C. check the batteries by turning on the lights or radio
  D. check to see if the wheels are flat
  C. check the batteries by turning on the lights or radio

• Question 165:

  Schrader valves can be found in your car's __________.

  A. tires
  B. engine
  C. transmission
  D. electronic ignition
  B. engine

• Question 166:

  The letter and numbers G78-15 printed on a tire refer to __________.

  A. load, width, and diameter.
  B. diameter and air pressure.
  C. cubic inch displacement.
  D. price code.
  A. load, width, and diameter.

• Question 167:

  What area of your car should be flushed periodically to maintain optimum performance?

  A. exhaust system
  B. brake system
  C. cooling system
  D. ignition system
  D. ignition system

• Question 168:

  The clamp used for holding things stationary, that has a screw which loosens and tightens the clamp, is called a ___________.

  A. pliers
  B. handscrew vise
  C. bench vise
  D. C clamp
  D. C clamp

• Question 169:

  The terminals exposed on the ignition induction coil are __________.

  A. two secondary and one primary
  B. one secondary and one primary
  C. one secondary and two primary
  D. two secondary and two primary
  C. one secondary and two primary

• Question 170:

  When a spark plug fires, it is part of the __________.

  A. power stroke
  B. exhaust stroke
  C. intake stroke
  D. compression stroke
  A. power stroke