Acme Packet AP0-001 Online Practice Questions and Exam Preparation

Acme Packet AP0-001 Online Questions & Answers

• Question 81:

  In a(n) __________ exchange, a Master Slave Determination message is an example of a type of message that might be exchanged during the media setup portion of the call.

  A. RAS
  B. ISDN
  C. H.245
  D. H.225
  C. H.245

• Question 82:

  How many simultaneous Telnet sessions does the Net-Net 4000 support in configuration mode in standard Net-Net OS version 2.x and above?

  A. 5
  B. 2
  C. 1
  D. 10
  C. 1

• Question 83:

  Examine below the output from the show sipd invite command.

  

  Of the 600 Busy Everywhere messages sent by the Net-Net 4000, how many in the last 140 seconds did not originate from a downstream device?

  A. 4
  B. 161
  C. 13
  D

• Question 84:

  An alarm is triggered in a high available (HA) pair when there is a condition or event within the __________.

  A. software only
  B. hardware only
  C. software or hardware
  D. ACLI
  C. software or hardware

• Question 85:

  In a high availability (HA) scenario, a node has a state of becoming Standby". This state indicates __________.

  A. a transitory state as the active node initially moves to becoming the standby node.
  B. the standby node is out of service.
  C. the standby node is taking the active role.
  D. the active node is out of service.
  A. a transitory state as the active node initially moves to becoming the standby node.

• Question 86:

  __________ establishes, modifies and removes CAM entries for packet forwarding.

  A. MBCD
  B. ACP
  C. SIPD
  D. APSD
  A. MBCD

• Question 87:

  You have used the no command to delete a configuration element. Which one of the following statements is TRUE?

  A. The deletion takes effect immediately.
  B. The deletion requires a reboot to take effect.
  C. The deletion is lost on immediate reboot.
  D. The deletion is reflected when viewing the running configuration.
  C. The deletion is lost on immediate reboot.

• Question 88:

  Examine the output below from the network interface configuration.

  

  When the Net-Net 4000 does not get an ARP response from the device configured as its gateway in the configured retry time period, it will____________.

  A. send traffic to the device configured in the sec-gateway field
  B. decrement its health score to 50 which may result in a failover to the standby
  C. use the Virtual Router Redundancy Protocol (VRRP) to determine a new default gateway
  D. use the Virtual Router Redundancy Protocol (VRRP) to the host(s) instead of the primary gateway
  B. decrement its health score to 50 which may result in a failover to the standby

• Question 89:

  __________ is/are stored in SDRAM.

  A. Licensing information
  B. Boot parameters
  C. Passwords
  D. Logs
  D. Logs

• Question 90:

  When two associated H323 stacks in different realms have the gatekeeper parameter defined, which one of the following statements is TRUE?

  A. The Net-Net 4000 will proxy LRQ and LCF messages from one gatekeeper to the other and the TCP connection for H.225.0 will be established afterwards.
  B. The Net-Net 4000 will respond locally to the LRQ with a LCF, and upon receiving the SETUP on the ingress leg, will open the TCP connection on the egress leg to send the SETUP.
  C. It is not possible to have two associated H323 stacks when both have gatekeepers defined.
  D. Registrations will be forwarded from one Gatekeeper to the other using unique RRQ messages.
  A. The Net-Net 4000 will proxy LRQ and LCF messages from one gatekeeper to the other and the TCP connection for H.225.0 will be established afterwards.