Acme Packet AP0-001 Online Practice Questions and Exam Preparation

Acme Packet AP0-001 Online Questions & Answers

• Question 131:

  Which two of the following statements about H.323 on the Net-Net 4000 are TRUE?

  A. When functioning as a back-to-back gateway, the Net-Net 4000 appears as just one H323 gateway to a single network.
  B. The Net-Net 4000 supports H.323 versions 1-6.
  C. Multiple virtual gateways or gatekeepers can exist on a single Net-Net 4000.
  D. There is a feature that allows an H.323 terminal that is unable to support Fast Start to receive a Slow Start call from a Fast Start source through the Net-Net 4000.
  C. Multiple virtual gateways or gatekeepers can exist on a single Net-Net 4000.
  D. There is a feature that allows an H.323 terminal that is unable to support Fast Start to receive a Slow Start call from a Fast Start source through the Net-Net 4000.

• Question 132:

  Which two the following Best Current Practice configuration models would be used to provide complete topology hiding by re-writing the From and To headers of a SIP message?

  A. Policy Based Realm Bridging
  B. SIP-NAT Bridging
  C. Header Manipulation Rule Bridging
  D. Session Agent Bridging
  B. SIP-NAT Bridging
  C. Header Manipulation Rule Bridging

• Question 133:

  Which two of the following scenarios about 503 Service Unavailable response codes on the Net-Net 4000 are TRUE?

  A. 503 Service Unavailable messages are never generated by the Net-Net 4000.
  B. A 503 Service Unavailable will be originated when the Net-Net 4000 is unable to forward a request due to session agent constraint or lack of bandwidth.
  C. The Net-Net 4000 will originate a 503 Service Unavailable when it has no call processing resources.
  D. By default, when the Net-Net 4000 has reached 95% CPU utilization, it will originate 503 Service Unavailable responses for all calls.
  B. A 503 Service Unavailable will be originated when the Net-Net 4000 is unable to forward a request due to session agent constraint or lack of bandwidth.
  C. The Net-Net 4000 will originate a 503 Service Unavailable when it has no call processing resources.

• Question 134:

  A __________ is a real-time interactive voice, video or multimedia communication that is established using IP signaling protocols such as SIP, H.323 or MGCP.

  A. session agent
  B. call content connection
  C. steering agent
  D. session
  A. session agent

• Question 135:

  Upon issuing the done command, you get an Error 409. What does this error indicate?

  A. The element you are creating is corrupted.
  B. The element you are trying to save doesn't exist.
  C. You are trying to create an element with a unique identifier that already exists.
  D. There is an internal server error.
  C. You are trying to create an element with a unique identifier that already exists.

• Question 136:

  The default baud rate for console connections to the Net-Net 4000 is ____________.

  A. 115200
  B. 2400
  C. 9600
  D. 56600
  A. 115200

• Question 137:

  Best current practice for the initial turn-up of a secondary node in a highly available (HA) pair calls for the acquire-config command targeting the ____________________interface on the primary node.

  A. Wancom0
  B. Wancom1
  C. Wancom2
  D. Wancom3
  A. Wancom0

• Question 138:

  Which two of the following statements about network interfaces are FALSE?

  A. For each physical interface, you must have at least one network interface with a sub- port-id of 999.
  B. More than one realm can be assigned to a network interface.
  C. By configuring the hip-ip-list and icmp-address parameters, you enable the Net-Net 4000 network processor to respond to PING.
  D. Network interfaces define a subnet of useable addresses, not necessarily the address that signaling and media has to be directed to.
  A. For each physical interface, you must have at least one network interface with a sub- port-id of 999.
  C. By configuring the hip-ip-list and icmp-address parameters, you enable the Net-Net 4000 network processor to respond to PING.

• Question 139:

  Best current practice for the initial turn-up of a secondary node in a highly available (HA) pair calls for the acquire-config command targeting the____________________interface on the primary node.

  A. Wancom0
  B. Wancom1
  C. Wancom2
  D. Wancom3
  A. Wancom0

• Question 140:

  An alarm is triggered in a high available (HA) pair when there is a condition or event within the __________.

  A. software only
  B. hardware only
  C. software or hardware
  D. ACLI
  C. software or hardware