Avaya 71300X Online Practice Questions and Exam Preparation

Avaya 71300X Online Questions & Answers

• Question 1:

  The media stream in WebRTC is anchored on which Avaya Aura component?

  A. Avaya Aura Media Gateway G430/G450
  B. Avaya Aura Media Server (AAMS)
  C. No DSP Resources are required
  D. G650 Medpro
  B. Avaya Aura Media Server (AAMS)

  ---

  The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls. The WebRTC Snap-in supports 1800 simultaneous calls at a rate of 28,000 BHCC in the following deployment model: 1 Avaya Breeze server 1 Avaya Session Border Controller for Enterprise (Avaya SBCE) server 8 Avaya Aura Media Servers References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 26 https://downloads.avaya.com/css/P8/documents/101013939

• Question 2:

  You are setting up the SIP connection between Avaya Aura Messaging (AAM) and the Avaya Aura Core, and the information you have entered for the Far-end connection is: What should you conclude from all this information?

  A. The connection cannot work because 5061 is not the Well-known port corresponding to TLS by standard.
  B. There will be conflicts in the TLS connections given that 5061 is a well-known port that other Endpoints and Servers use within the same network.
  C. A Security Certificate from the same Certificate Authority as the other Avaya Aura components, must be installed on the AAM Server to guarantee successful TLS Connections.
  D. The IP address is wrong because its range does not correspond to a valid TLS-compatible IP address.
  C. A Security Certificate from the same Certificate Authority as the other Avaya Aura components, must be installed on the AAM Server to guarantee successful TLS Connections.

• Question 3:

  WebRTC is used for which type of calls?

  A. video calls only
  B. calls originated from internal web browsers only
  C. calls originated from external web browsers only
  D. calls originated from internal and external web browsers
  D. calls originated from internal and external web browsers

  ---

  The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls. References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 6 https://downloads.avaya.com/css/P8/documents/101013939

• Question 4:

  On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?

  A. from Avaya Aura System Manager, navigate to "Session Border Controller for Enterprise>; SBCE Administration" menu
  B. from the SBCE EMS Web Console
  C. from the SBCE Server command line via SSH session, using PuTTY
  D. from the traceSIP client installed on a local PC
  C. from the SBCE Server command line via SSH session, using PuTTY

  ---

  Stat the tue Tracing Tools, TraceSM, SSH to Session Manager

  1. Launch PuTTY (or similar client application) for a SSH session to Session Manager (port 22). Use the Session Manager IP Address (172.16.255.107).

  2. Log in.

  3. At the Session Manager command line type traceSM 瓁 and press Enter. Note: The traceSM tool shows the SIP call flow in Session Manager.

  It gives insight into Session Manager's decisions.

  Benefit: can filter certain types of SIP messages

  References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page 485

• Question 5:

  Which statement about the SIP Entities to support single node Avaya Aura Presence Services is true?

  A. Only one SIP Entity is built of Type = "Presence Services", which uses the SM100 IP address of the Avaya BreezeTM node.
  B. Only one SIP Entity is built of Type = "Avaya Breeze", which uses the SM100 IP address of the Avaya BreezeTM node.
  C. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Presence Services".
  D. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Other".
  B. Only one SIP Entity is built of Type = "Avaya Breeze", which uses the SM100 IP address of the Avaya BreezeTM node.

• Question 6:

  When Avaya Aura Presence Services is implemented, which statement is true about Port Management?

  A. It allows multi-media services over a standard Web-Browser.
  B. It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.
  C. It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.
  D. Port 5222 is used for one-X?Endpoints, while Port 5269 is open for connecting with other XMPP 3rd-Party Servers.
  D. Port 5222 is used for one-X?Endpoints, while Port 5269 is open for connecting with other XMPP 3rd-Party Servers.

  ---

  Port 5222: XMPP connection configuration The Connection Manager runs by default when you install the XCP server. It is configured with a JSM Command Processor and two XMPP directors. The XMPP directors handle communication with IM clients. One of the directors is configured to use port 5222 and the other is configured to use port 5223 for secure communications. Port 5269:Example Obtaining the Server-to-Server Port from an Openfire server Procedure

  1.

  Log in to the Openfire Web console.

  2.

  Click Server > Server Settings > Server to Server.

  3.

  In the Service Enabled section, the Enabled check box should be checked, and the port value is contained in the box to the right of Remote servers can exchange packets with this server on port. By default the value is 5269, and it is recommended that this default value be maintained. References: Administering Avaya Aura Presence Services, Release 6.2.4, (June 2014), pages 110, 154 https://downloads.avaya.com/css/P8/documents/100180467

• Question 7:

  Which three statements about Avaya BreezeTM are true? (Choose three.)

  A. It allows application developers to quickly add new capabilities to their Avaya solutions.
  B. It is used by Avaya, Partner, and Enterprise Developers.
  C. It does not require a license.
  D. It was formerly called Collaboration POD but has been renamed to Avaya BreezeTM.
  E. It is a development platform that enables rapid development for applications that are targeted to meet a customer's communications needs.
  A. It allows application developers to quickly add new capabilities to their Avaya solutions.
  B. It is used by Avaya, Partner, and Enterprise Developers.
  E. It is a development platform that enables rapid development for applications that are targeted to meet a customer's communications needs.

  ---

  Avaya Breeze provides a virtualized and secure application platform where Java programmers can develop and dynamically deploy advanced collaboration capabilities that extend the power of Avaya Aura. Customers, partners, and Avaya organizations can rapidly develop snap-ins and applications that are deployed on Avaya Breeze.

• Question 8:

  Before SIP Trunking configuration can begin, which state must the Avaya Session Border Controller for Enterprise (SBCE) be in?

  A. Registered
  B. Provisioned
  C. Commissioned
  D. Ready
  C. Commissioned

  ---

  Prerequisite Conditions for SIP Trunking

  Starting point for SIP-trunking administration:

  System Management > Installed tab shows SBC(s) Commissioned indicates a successful initial console configuration.

  References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page 302

• Question 9:

  To route calls to Avaya Aura Messaging (AAM), which routing strategy is used by Avaya Aura Session Manager (SM)?

  A. Automatic Route Selection (ARS)
  B. Automatic Alternate Routing (AAR)
  C. Network Routing Policies (NRP)
  D. Registry Routing
  C. Network Routing Policies (NRP)

  ---

  Routing policies describe the conditions under which Session Manager will route calls between Communication Manager and Avaya Aura Messaging. References: Application Notes for Configuring Avaya Aura Messaging 6.1 as a Voice Messaging Solution for Avaya Aura Communication Manager 6.0.1 Featureand; Evolution Server Using SIP Trunks and Avaya Aura Session Manager 6.1 璉 ssue 1.0, page 25 https://www.devconnectprogram.com/fileMedia/download/08ad7375-7c2e-4767-929f- 15f4e8130a0d

• Question 10:

  Which Avaya BreezeTM Cluster type is the Avaya Aura Presence Services snap-in installed on?

  A. Presence Services
  B. Core Platform
  C. General Purpose
  D. IM_Presence
  B. Core Platform

  ---

  Verifying that Presence Services snap-in is ready to support Presence and IM Procedure

  1.

  On the System Manager web console, navigate to Elements > Avaya Breeze> Cluster Administration.

  2.

  Locate the row for the cluster, and verify that:

  * The Cluster Profile field shows Core Platform.

  etc.

  References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page https://downloads.avaya.com/css/P8/documents/101013646