Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 31:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address.

  You need to prevent all client computers that have physical address beginning with 98-5F from leasing an IP address from Server1.

  What should you do?

  A. From the properties of Scope1, modify the Conflict detection attempts setting.
  B. From the properties of Scope1, configure Name Protection.
  C. From the properties of IPv4, configure the bindings.
  D. From IPv4, create a new filter.
  E. From the properties of Scope1, create an exclusion range.
  F. From IPv4, run the DHCP Policy Configuration Wizard.
  G. From Control Panel, modify the properties of Ethernet.
  H. From Scope1, create a reservation.
  D. From IPv4, create a new filter.

• Question 32:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

  Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

  On Server1, you have the following zone configuration.

  

  You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.

  Solution: From a Group Policy object (GPO) in the domain, you add a rule to the Name Resolution Policy Table (NRPT).

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 33:

  You have a virtual machine named Server1 that runs Windows Server 2016.

  You plan to use Server1 as part of a Software Defined Networking (SDN) solution.

  You need to implement the Border Gateway Protocol (BGP) on Server1.

  What should you install?

  A. the peer Name Resolution Protocol (PNRP)feature
  B. the Routing role service
  C. the Network Device Enrollment Service role service
  D. the Network Policy and access Services server role
  B. the Routing role service

• Question 34:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one

  correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016. The settings for VM1 are configured as shown in the exhibit below.

  

  You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.

  Solution: You enable the Guest Service integration service for VM1.

  Does this meet the goal?

  A. YES
  B. NO
  A. YES

• Question 35:

  The following question is difficult, take your time and use a piece of paper if you need. What is the network ID of the IP node 129.56.189.41 with a subnet mask of 255.255.240.0?

  A. 129.56.189.0
  B. 129.56.176.1
  C. 129.56.189.1
  D. 129.56.176.0
  D. 129.56.176.0

• Question 36:

  You have multiple servers that run Windows Server 2016. You have a server named Server1 that is configured

  as a domain controller and a DNS server.

  You need to create an Active Directory-integrated zone on Server1.

  What should you run?

  A. dism.exe
  B. dns.exe
  C. dnscmd.exe
  D. netsh.exe
  E. Set-DhcpServerDatabase
  F. Set-DhcpServerv4DnsSetting
  G. Set-DhcpServerv6DnsSetting
  H. Set-DNSServerSetting
  C. dnscmd.exe

• Question 37:

  HOTSPOT

  You network contains an Active Directory domain. The domain contains two DHCP servers named Server1 and Server2.

  Server1 has the scopes shown in the following table.

  

  Server2 has the scopes shown in the following table.

  

  You perform the following configurations on Server1:

  1. Add a server option of 006 DNS Servers.

  2. Set Conflict detection attempts to 2.

  3. Add a reservation to Scope1.

  You plan to configure DHCP failover between Server1 and Server2.

  Which scopes can you configure to fail over from Server1 to Server2, and which configurations can fail over? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 38:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris, and Berlin.

  The London site contains a web server named Web1 that runs Windows Server 2016.

  You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.

  Solution: You install the Static Content role service, and then you restart the IIS Admin Service.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 39:

  You have a server named Server1 that connects directly to multiple networks.

  You need to configure Server1 as a BGP router.

  What should you install on Server1?

  A. the MultiPoint Services server role
  B. the Network Policy and Access Services server role
  C. the Network Controller server role
  D. the Routing role service
  D. the Routing role service

• Question 40:

  Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server

  named Server2 that runs Windows Server 2016.

  Server2 has 10 IPv4 scopes.

  You need to ensure that the scopes are backed up every 30 minutes to the folder D:\DHCPBackup.

  What should you run?

  A. dism.exe
  B. dns.exe
  C. dnscmd.exe
  D. netsh.exe
  E. Set-DhcpServerDatabase
  F. Set-DhcpServerv4DnsSetting
  G. Set-DhcpServerv6DnsSetting
  H. Set-DNSServerSetting
  E. Set-DhcpServerDatabase