Microsoft 70-735 Online Practice Questions and Exam Preparation

Microsoft 70-735 Online Questions & Answers

• Question 51:

  You have a computer named Computer1.

  You deploy an image of Windows 10 to Computer1. You start Computer1 in audit mode, and then you install several device drivers.

  You need to capture an image of Computer1.

  Which tool should you use?

  A. Windows System Image Manager (Windows SIM)
  B. dism.exe
  C. Express Deployment Tool (EDT) for Windows 10
  D. scanstate.exe
  B. dism.exe

  ---

  References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/prepare-a-snapshot-of-the-pc-generalize-and-capture-windows-images-blue-sxs

• Question 52:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are configuring a reference computer for a new UEFI-based deployment image of the 64-bit version of Windows 10. The reference computer has two physical hard disk drives.

  You need to configure a partition on Disk 0 to support a recovery partition.

  Solution: You create a primary partition of 250 MB that uses the NTFS file system.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  This partition must be at least 300 MB

  References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigpt-based-hard-drive-partitions

• Question 53:

  You deploy an image of Windows 10 to several computers by using an answer file. The answer file contains the following information.

  

  You need to verify whether the support information is displayed in Windows. What should you do?

  A. From the Start menu, open Msconfig.
  B. From the Settings app, click System, and then click About.
  C. From the Start menu, open Msinfo32.
  D. From Control Panel, open System.
  D. From Control Panel, open System.

  ---

  This is a tricky question. The support information is displayed in two places as defined in answers B and D. However, the logo will only be displayed in the System Control Panel applet.

• Question 54:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are building a new image of Windows 10 that contains a push-button reset solution.

  You need to test whether push-button reset works as expected.

  Solution: From Windows 10, you press and hold the SHIFT key, and then you restart the computer. After the computer restarts, you click Troubleshoot, and then you click Reset this PC.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  References: https://support.microsoft.com/en-us/help/12415/windows-10-recovery-options https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/push-button-reset-overview

• Question 55:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are building a new image of Windows 10 that contains a push-button reset solution.

  You need to test whether push-button reset works as expected.

  Solution: You start the computer from the installation media for Windows 10. You click Troubleshoot, and then you click System Image Recovery.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 56:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

  You have an image of Windows 10 for a new desktop computer model.

  You plan to deploy the computer to multiple regions around the world.

  You need to add new languages to the image by using Features on Demand language packs.

  Which parameter should you specify when you run dism.exe?

  A. /Add-Capability
  B. /Add-Driver
  C. /Add-Package
  D. /Add-ProvisionedAppxPackage
  E. /Apply-CustomDataImage
  F. /Apply-Image
  G. /Apply-Unattend
  H. /Export-Image
  C. /Add-Package

  ---

  References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-drivers-langs-universal-apps-sxs

• Question 57:

  You have a computer that runs Windows 10. The computer starts in UEFI mode and has a 64-bit processor.

  You insert a USB key in the computer. The USB key has a drive letter of F.

  You need to ensure that you can start the computer by using Windows Preinstallation Environment (Windows PE) from the USB key.

  Which two commands should you run? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. makewinpemedia.cmd /UFD C:\WinPe F:
  B. makewinpemedia.cmd /ISO C:\WinPe F:
  C. copype.cmd amd64 C:\WinPe
  D. dism.exe /Export-Image /SourceImageFile:C:\WinPE\boot.wim/SourceIndex:1/DestinationImageFile:F:\boot.wim
  E. copype.cmd x86 C:\WinPe
  A. makewinpemedia.cmd /UFD C:\WinPe F:
  E. copype.cmd x86 C:\WinPe

  ---

  References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-create-usb-bootable-drive

• Question 58:

  You deploy an image of Windows 10.

  From audit mode, you install several applications for a customer, and then you run sysprep.exe/oobe/quit.

  You need to identify whether any errors occurred when you ran sysprep.exe.

  Which folder contains the log files?

  A. %WINDIR%\Logs
  B. %WINDIR%\System32\LogFiles
  C. %WINDIR%\Panther\
  D. %WINDIR%\System32\Sysprep\Panther
  C. %WINDIR%\Panther\

• Question 59:

  You have an image of Windows 10 that runs the Windows 10 Anniversary Update.

  You plan to deploy the image to several new computers.

  You add Microsoft Office 2016 to the image.

  You need to ensure that when the image is deployed, users will see the Office 2016 tiles on the Start menu as shown in the exhibit. (Click the Exhibit tab.)

  

  What should you do?

  A. Create a LayoutModification.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ folder.
  B. Modify the DefaultLayouts.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft\WindowsApps\ folder.
  C. Modify the DefaultLayouts.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft\Windows\Shell\folder.
  D. Create a LayoutModification.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft\WindowsApps\ folder.
  A. Create a LayoutModification.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ folder.

• Question 60:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.

  You are building a new image of Windows 10.

  You have several pictures that you plan to make available as desktop backgrounds.

  You copy the installation media for Windows 10 to Computer1.

  You need to ensure that the Windows 10 image contains the desktop backgrounds.

  What should you do first?

  A. Mount the Install.wim file.
  B. Mount the Boot.wim file.
  C. Modify the Winpeshl.ini file.
  D. Create an answer file.
  E. Modify the Windows.ini file.
  F. Create a provisioning package.
  G. Load a catalog file (.clg).
  H. Create a cabinet file (.cab).
  A. Mount the Install.wim file.